OneStopList

Gods and goddesses

Change ASUS Zephyrus Keyboard Lighting: Full Guide

Updated November 20, 2026

Yes, you can change the ASUS Zephyrus keyboard lighting using the built-in Armoury Crate software or the dedicated hotkeys on the keyboard itself. The exact options depend on your specific Zephyrus model, but most support per-key RGB customization, brightness control, and several preset lighting effects.

How the Zephyrus Lighting System Works

ASUS Zephyrus laptops use Aura Sync technology, which is managed through the Armoury Crate application that comes pre-installed on every unit. Unlike older laptops with simple single-color backlights, most Zephyrus models feature per-key RGB LEDs controlled by a small microcontroller that reads profiles from the software. The system has two layers: the hardware-level hotkeys (which work even before Windows loads) and the software-level profiles that offer far more granular control. The hotkeys are always active during boot and in the BIOS, while Armoury Crate settings take over once the operating system starts.

Using the Keyboard Hotkeys for Quick Changes

Every Zephyrus keyboard has a function (Fn) key that combines with the top-row keys to control lighting without opening any software. The most common shortcuts are:

  • Fn + F3 – decreases brightness or cycles to the previous lighting mode
  • Fn + F4 – increases brightness or cycles to the next lighting mode
  • Fn + Left/Right arrow – switches between preset lighting effects on some models
  • Fn + Up/Down arrow – adjusts brightness on newer Zephyrus models

These hotkeys cycle through a limited set of built-in effects (like breathing, strobe, and color cycle) that are stored in the keyboard’s firmware. If you want a specific color or a custom effect, you must use Armoury Crate. Note that the exact key combination varies slightly between the G14, G15, M16, and other Zephyrus lines, so check your user manual if the arrows don’t respond as expected.

Customizing Lighting in Armoury Crate

Armoury Crate is the central hub for all ASUS gaming peripherals and system settings. To change the lighting, open the app, select your laptop from the left sidebar, and click on the “Aura Sync” or “Lighting” tab. From there you can choose from these main options:

  1. Static – a single solid color of your choice, selected from a color wheel or hex code input.
  2. Breathing – a color or gradient that fades in and out at a speed you control.
  3. Strobe – rapid flashing that can be set to a single color or alternating colors.
  4. Color Cycle – automatically shifts through the entire RGB spectrum.
  5. Rainbow – a flowing gradient effect that moves across the keys.
  6. Per-key customization – click on individual keys in the visual keyboard layout to assign a unique color to each one.

You can also set different effects for different scenarios (like gaming vs. typing) and link the lighting to other Aura Sync devices, such as an ASUS mouse or external RGB strip. The software saves your profile automatically, and you can create multiple profiles for different games or moods.

Choosing the Right Lighting Profile

Your choice of lighting should match how you use the laptop. For pure typing in a dark room, a static low-brightness white or warm yellow is easiest on the eyes and improves key visibility. For gaming, many players prefer a single color that matches the game’s UI (like red for a shooter) to reduce distraction. The per-key mode is useful for games that use specific keys (like WASD in first-person shooters) – you can highlight those keys in a bright color and keep the rest dim. Avoid the rainbow or strobe effects during work or study, as they can be visually tiring and reduce battery life. Since the lighting draws power from the battery, using a static effect at 50% brightness can extend your unplugged runtime by 10–20 minutes compared to a full-brightness rainbow effect.

Common Problems and Fixes

Users frequently encounter a few issues when trying to change Zephyrus lighting. The most common is that the hotkeys stop working after a Windows update – this is almost always fixed by updating Armoury Crate to the latest version from the Microsoft Store or the ASUS support site. Another issue is the lighting reverting to default after a reboot, which usually means the software profile wasn’t saved correctly; go back to the Aura Sync tab, make your changes, and click the save icon. If the keyboard shows no light at all, check that the brightness isn’t set to zero (press Fn + F4 a few times) and that the keyboard backlight isn’t disabled in the BIOS (restart, press F2, and look under “Advanced” or “Keyboard”). In rare cases, a hard reset (holding the power button for 30 seconds) can clear a stuck lighting controller.

Differences Across Zephyrus Models

Not all Zephyrus laptops have the same lighting hardware. The Zephyrus G14 and G15 use a standard per-key RGB keyboard, while the M16 and S17 also support per-key RGB but with slightly different effect options in Armoury Crate. The Zephyrus Duo series (with the second screen) has a more complex lighting system that can sync the keyboard with the ScreenPad Plus. Older models from 2019 and 2020 may only have a single-zone backlight (all keys same color) rather than per-key RGB – in that case, Armoury Crate will only offer a static color and brightness control, not the full effect library. Always check your exact model number (e.g., GA401, GU603) on the bottom of the laptop to confirm what your hardware supports.

Alternatives to Armoury Crate

While Armoury Crate is the official tool, some users prefer third-party software for more advanced control. OpenRGB is a popular open-source program that supports many ASUS laptops, including several Zephyrus models, and offers effects that Armoury Crate lacks (like a music visualizer). However, OpenRGB can conflict with Armoury Crate if both are running, so you must disable Aura Sync in the ASUS software first. Another option is to use the keyboard’s firmware-only mode by holding Fn + Esc for a few seconds – this toggles between “software mode” and “hardware mode,” where the keyboard uses its last saved profile without any software running. This is useful if you want a consistent look when booting into Linux or a different OS that doesn’t have ASUS drivers.

Frequently Asked Questions

Why won’t my keyboard light change color? This usually means your model has a single-zone backlight, not per-key RGB, or that Armoury Crate is not running in the background. Check your model specifications first, then ensure the software is active in the system tray.

Can I set different colors for each key? Yes, but only on models with per-key RGB (most Zephyrus from 2020 onward). In Armoury Crate, go to the Aura Sync tab, select “Per Key,” and click each key to assign a color.

Does keyboard lighting drain the battery? Yes, but the impact is modest. At full brightness with a rainbow effect, you might lose 10–15 minutes of battery life over a 6-hour session. Reducing brightness to 50% or using a static color cuts this loss almost in half.

How do I turn off the lighting completely? Press Fn + F4 repeatedly until the brightness reaches zero, or in Armoury Crate, select the “Off” option in the lighting effects list. You can also set a profile with all keys set to black in per-key mode.

Will changing lighting void my warranty? No. Using the official Armoury Crate software or the built-in hotkeys is fully supported by ASUS and does not affect your warranty. Third-party software like OpenRGB is generally safe but could theoretically cause a firmware glitch, so use it at your own risk.

Why does my lighting reset after every reboot? This happens when the Armoury Crate service is not set to start automatically. Open the app, go to Settings, and ensure “Start with Windows” is enabled. If it still resets, try creating a new profile and assigning it as the default.

Related

How pages are sourced and corrected: Sources and editorial policy.