AR North America Pumps is a brand of centrifugal pumps primarily used for water transfer, irrigation, and light-duty dewatering, manufactured by AR North America, a subsidiary of the Italian company Annovi Reverberi S.p.A. These pumps are widely sold in home improvement and farm supply stores across the United States and Canada, and are known for being affordable, easy to service, and reliable for residential and small commercial tasks.
Background of the Brand
AR North America is the North American distribution and manufacturing arm of Annovi Reverberi, an Italian company founded in 1958 that originally specialized in high-pressure pumps for agricultural spraying. Over the decades, the company expanded into pressure washers and, later, into portable water pumps for the consumer market. The AR North America line of pumps is distinct from the company’s industrial high-pressure plunger pumps; the consumer pumps are simple, cast-aluminum or cast-iron centrifugal units designed for moving large volumes of water at low to moderate pressure.
The brand’s popularity in North America grew because its pumps are sold under the AR name as well as under private labels for retailers, and they are often paired with small gasoline engines such as those made by Honda, Briggs & Stratton, or Subaru. The pumps are assembled in the United States in a facility in Mooresville, North Carolina, though many internal components are sourced from the parent company in Italy. This combination of Italian engineering and local assembly has made them a common sight on job sites and farms.
How These Pumps Work
AR North America pumps are almost exclusively centrifugal pumps. The basic principle is simple: a rotating impeller, driven by a gas engine or electric motor, spins inside a volute casing. Water enters through the center of the impeller (the suction inlet), gets caught by the curved vanes, and is flung outward by centrifugal force. The casing’s spiral shape converts the velocity of the water into pressure, pushing it out through the discharge port.
Most AR pumps are self-priming models, meaning they can draw water up from a lower level through a suction hose without needing to be filled manually every time. They achieve this with a specially designed volute that retains a small amount of water in the casing after shutdown, which creates the vacuum needed to lift water on the next start. Non-self-priming versions exist but are less common in the consumer line. The maximum suction lift is typically around 25 to 28 feet, and the maximum discharge head (how high the pump can push water vertically) ranges from about 80 to 120 feet depending on the model.
Choosing the Right AR Pump Model
AR North America offers several series, each tailored to a different type of use. The most common are the P series (plastic-bodied, lightweight, for clean water), the E series (aluminum-bodied, slightly heavier duty), and the D series (cast-iron, for dirty water and heavier use). When selecting a model, you should consider three main factors:
- Water type: Clean water (rain, tap, well) can go through any model. Water with sand, mud, or small debris requires a model with a larger impeller clearance and a strainer; cast-iron models handle abrasion better than plastic.
- Flow rate: Measured in gallons per minute (GPM) at a given head. A typical 2-inch pump moves about 150 GPM at zero head, but drops to around 60 GPM at 80 feet of head. Match this to your task—filling a pool is different from irrigating a field.
- Engine type: Most AR pumps use a 79cc to 212cc four-stroke engine. Smaller engines (79cc) are fine for 1.5-inch ports and light transfer; larger engines (196cc or 212cc) are needed for 2-inch or 3-inch ports and high head.
Also check the pump’s port size (inlet and outlet diameter). A 1.5-inch pump moves about 90 GPM, a 2-inch moves 150 GPM, and a 3-inch moves up to 300 GPM. Larger ports require larger hoses, which cost more but reduce friction loss over long distances.
Common Problems and Maintenance
Like any small engine pump, AR units have a few recurring issues. The most common is loss of prime: if the pump runs dry or the suction hose leaks air, it will not draw water. Check the suction hose gasket and ensure the hose is not collapsed. Another frequent issue is a clogged impeller, especially when pumping dirty water; debris like leaves or small stones can jam the impeller, causing the engine to strain or stall. To clear it, remove the cover plate on the volute (usually four bolts) and clean out the impeller.
Regular maintenance is straightforward but essential:
- Change the engine oil after the first 5 hours of use, then every 50 hours or each season.
- Drain the water from the pump casing after each use, especially in freezing weather, to prevent cracking.
- Replace the spark plug annually or when starting becomes difficult.
- Clean or replace the air filter every season, more often in dusty conditions.
- Inspect the impeller for wear if the pump’s flow drops noticeably; a worn impeller loses efficiency.
Costs and Value
AR North America pumps are priced at the lower to middle end of the market. As of recent retail listings, a basic 1.5-inch plastic-bodied pump with a 79cc engine sells for roughly $150 to $200. A 2-inch aluminum model with a 196cc engine ranges from $250 to $350. The top-of-the-line 3-inch cast-iron units with a 212cc engine can approach $500. These prices are significantly lower than comparable professional-grade pumps from brands like Honda or Gorman-Rupp, which often cost twice as much.
Replacement parts (impellers, seals, gaskets, and volutes) are widely available online and through small engine repair shops. A full rebuild kit for the pump head typically costs $20 to $40, and the engine parts are standard Honda-compatible components. This repairability is a major reason why AR pumps are popular among homeowners who prefer to fix rather than replace.
Comparison with Other Pump Brands
In the same price and performance class, AR competes directly with brands like Champion, Generac, and Simpson. AR distinguishes itself by using a cast-iron impeller and volute on many models, whereas competitors often use aluminum or plastic for weight savings. Cast iron is heavier but more durable against abrasive water and less likely to warp from heat. AR also uses a standard SAE 1-inch keyed shaft on its engine connection, making it easy to replace the pump head with a generic centrifugal pump if needed.
Compared to premium brands like Honda or Tsurumi, AR pumps lack features like automatic idle-down, oil-alert sensors, or ceramic mechanical seals. However, for occasional residential use—draining a pool, watering a garden, or emptying a flooded basement—the AR unit is often the better value because the lower price outweighs the missing conveniences.
Safety and Operational Tips
Operating a gas-powered pump involves real hazards. Always run the pump outdoors or in a well-ventilated area, never inside a garage or basement, because the engine emits carbon monoxide. Keep the pump on a level, stable surface to prevent tipping and oil starvation. Before starting, check that all hose connections are tight and that the suction hose is not kinked. Never run the pump dry for more than a few seconds; the water acts as a coolant for the mechanical seal, and running dry will quickly destroy it.
When pumping flammable liquids like gasoline or solvents, do not use a standard AR pump—these are designed for water only. Also, be aware of the risk of back-siphoning: if the discharge hose is submerged in a pool or tank, and the pump stops, water can flow back through the pump and into the engine. Install a check valve on the discharge line if this is a concern. For electrical models, use a GFCI-protected outlet and keep the cord away from water.
Frequently Asked Questions
Can an AR North America pump run dry?
No. Running dry for more than 30 seconds will overheat the mechanical seal and cause it to fail, leading to water leaking into the engine or the pump losing suction permanently. Always prime the pump with water before starting.
What is the difference between a 1.5-inch and 2-inch pump?
The port size determines the maximum flow rate and the size of debris that can pass through. A 1.5-inch pump moves about 90 GPM and handles small particles, while a 2-inch pump moves 150 GPM and can pass slightly larger debris. For most home tasks, a 2-inch is the most versatile.
How do I prime an AR pump?
Remove the fill plug on top of the volute, pour water into the casing until it is full, then replace the plug. Ensure the suction hose is submerged and free of air leaks. The pump should self-prime within 30 seconds of starting.
Why is my AR pump not drawing water?
The most common causes are an air leak in the suction hose, a clogged strainer, a worn impeller, or a stuck check valve. Check the hose connections first, then inspect the strainer and impeller. If the pump has been stored dry, the impeller may have seized; turn the engine by hand to free it.
Can I leave water in the pump over winter?
No. Water left in the casing will freeze, expand, and crack the volute or impeller. After the last use of the season, drain the pump by removing the drain plug and tilting the unit to empty all water. Also drain the engine fuel or add a fuel stabilizer.
Are AR pumps repairable?
Yes, very much so. The pump head can be disassembled with basic tools, and replacement impellers, seals, and gaskets are inexpensive and widely available. The engine is a standard horizontal-shaft small engine, so parts are interchangeable with Honda clones.
Related
- Castle in the Sky: Myth, Meaning, and Real Places
- Athena Perfume Notes: The Real Scent Story
- Manananggal in the City? Myth & Reality
How pages are sourced and corrected: Sources and editorial policy.