OneStopList

Gods and goddesses

Lakes Pipe and Supply: Real Products and Services

Updated November 17, 2026

Lakes Pipe and Supply is a regional wholesale distributor of plumbing, irrigation, and industrial pipe products, serving professional contractors and municipalities primarily in the western United States. The company stocks a wide range of PVC, CPVC, copper, and steel pipe, along with fittings, valves, and related supplies, and operates through a network of branch locations rather than a single retail store.

Background and Company Scope

Lakes Pipe and Supply operates as a distributor, meaning it buys directly from manufacturers and sells to licensed plumbers, irrigation contractors, and utility crews. The company has a presence in states such as California, Nevada, and Arizona, with multiple branch yards that allow for local pickup and same-day availability of common materials. Unlike big-box home improvement stores, Lakes Pipe and Supply focuses on professional-grade products and bulk quantities, though some branches may serve walk-in customers with a contractor account.

The company is part of a larger distribution network, and its catalog includes both underground and above-ground piping systems. Typical customers include residential plumbing companies, commercial builders, and public works departments handling water and sewer lines. The company also carries specialty items like fire sprinkler pipe and drainage products, which are not always stocked by general hardware retailers.

Main Product Lines

Lakes Pipe and Supply organizes its inventory around several core categories, each with distinct uses and standards.

  • PVC Pipe: Available in Schedule 40 and Schedule 80, used for drainage, venting, and some pressure applications. Schedule 40 is common for residential DWV (drain-waste-vent) systems, while Schedule 80 is thicker and rated for higher pressure.
  • CPVC Pipe: Chlorinated polyvinyl chloride, rated for hot water up to 180°F, often used in residential water supply lines where copper is not preferred.
  • Copper Pipe: Types M, L, and K, with Type M being thin-wall for residential water, Type L for standard plumbing, and Type K for underground or high-pressure service.
  • Steel Pipe: Galvanized and black steel, used for gas lines, fire sprinklers, and structural applications.
  • PEX Tubing: Cross-linked polyethylene, sold in rolls for radiant heating and potable water systems, often with crimp or expansion fittings.
  • Fittings and Valves: Elbows, tees, couplings, ball valves, gate valves, and check valves in matching materials and sizes.

For irrigation, the company stocks poly drip tubing, sprinkler heads, and backflow prevention devices, which are essential for landscape systems in arid regions.

How to Purchase and Set Up an Account

Lakes Pipe and Supply primarily sells to trade professionals, so the purchasing process differs from a retail store. To buy, you typically need to open a commercial account, which involves providing a business license, tax ID, and trade references. Once approved, you receive a credit line and can order by phone, in person, or through a branch counter.

For homeowners or small contractors without an account, some branches allow cash or credit card purchases at the counter, but pricing may be higher than for account holders. It is best to call the nearest branch to confirm their walk-in policy, as it varies by location. Delivery is usually available for larger orders, but there may be a minimum quantity or a delivery fee depending on the distance.

Returns are generally accepted for unopened, standard stock items within a set period, but special-order items or cut pipe are non-returnable. Always check the branch’s return policy before purchasing, especially for large quantities.

Choosing the Right Pipe for Your Project

Selecting the correct pipe material depends on the fluid being carried, the pressure, and the installation environment. For potable water inside a house, copper or PEX are common choices; PEX is easier to install and resistant to freezing, while copper is more durable but costlier. For underground sewer lines, PVC Schedule 40 is standard, but heavy-duty applications may require SDR 35 (sewer and drain) pipe, which is thinner but designed for gravity flow.

For irrigation, use poly pipe (polyethylene) for main lines because it bends around obstacles and resists UV degradation when buried. For compressed air systems, black steel or aluminum is preferred over PVC, which can shatter under pressure. Always check local building codes, as some jurisdictions restrict certain materials for gas or fire suppression lines.

A common mistake is using Schedule 40 PVC for hot water; that requires CPVC or PEX. Another is mixing fitting brands without checking pressure ratings. Read the pipe’s printed markings—they list the schedule, pressure rating, and standard (e.g., ASTM D1785 for PVC).

Common Problems and Solutions

Contractors frequently encounter issues with pipe sizing and compatibility. One recurring problem is using the wrong glue or primer for PVC vs. CPVC—each requires its own solvent cement. Using PVC cement on CPVC can cause joint failure. Always use the matching primer and cement, and allow proper cure time before pressurizing the system.

Another issue is thread sealing. For steel pipe, use Teflon tape or pipe dope on male threads, but do not overtighten, which can crack fittings. For plastic threaded joints, use a sealant rated for plastic and hand-tighten plus a quarter turn with a wrench.

Freezing is a major concern in colder climates. PEX expands slightly to tolerate freezing, but copper and PVC can burst. Insulate exposed pipes and drain outdoor lines before winter. If a pipe bursts, shut off the main water valve immediately and call a licensed plumber for repairs.

Cost Considerations and Budgeting

Pipe prices vary by material and diameter. As a general guide, PVC Schedule 40 costs less than copper per linear foot, but copper lasts longer and can be sold as scrap. PEX is often cheaper than copper and requires fewer fittings because it comes in long coils. Steel is moderate in cost but heavy and labor-intensive to cut and thread.

For a typical residential water heater replacement, the piping materials might cost $50–$150, depending on whether you use copper or PEX. For a full house repipe, expect several hundred dollars in materials alone, plus fittings, hangers, and valves. Always buy a little extra (10–15%) to account for cuts and mistakes.

Lakes Pipe and Supply publishes price lists at branches, and volume discounts apply for large orders. If you are comparing prices, factor in delivery charges and the cost of driving to a branch versus a local hardware store. For small jobs, a retail store may be cheaper; for large projects, a wholesale distributor usually wins.

Safety and Code Compliance

Working with pipe involves several safety hazards. When cutting PVC or CPVC, wear safety glasses to avoid chips. When soldering copper, use a flame-resistant barrier and ventilate the area—lead-free solder is required for potable water lines. For steel pipe, cutting and threading creates sharp burrs; deburr the ends to prevent injury and to ensure a proper seal.

All plumbing must meet local building codes, which are based on the International Plumbing Code (IPC) or Uniform Plumbing Code (UPC), depending on your state. These codes specify minimum pipe sizes, support spacing, and venting requirements. For example, a 2-inch drain line must slope at least 1/4 inch per foot to carry waste properly. Failure to follow codes can result in failed inspections and unsafe conditions.

If you are not a licensed plumber, check whether your municipality requires a permit for the work. Many areas allow homeowners to do their own plumbing, but the work must pass inspection. For gas lines, always hire a licensed professional—improper gas piping can cause explosions or carbon monoxide leaks.

Frequently Asked Questions

Do I need a contractor license to buy from Lakes Pipe and Supply?
No, but you generally need a business account. Some branches sell to the public at counter prices, but you may pay a higher rate. Call ahead to ask if they require a tax ID or proof of trade.

Can I return unused pipe?
Unused, unmarked pipe in original condition is usually returnable within 30 days, but cut pipe, special orders, and fittings that have been glued are not. Keep your receipt and check the branch’s policy before buying.

What is the difference between Schedule 40 and Schedule 80 PVC?
Schedule 80 has thicker walls and a higher pressure rating, making it suitable for industrial and high-pressure applications. Schedule 40 is lighter and cheaper, used for drainage and low-pressure water lines. For most home plumbing, Schedule 40 is sufficient.

Does Lakes Pipe and Supply deliver?
Yes, delivery is available for orders above a minimum amount, typically $500 or more, depending on the branch. Delivery fees are based on distance and order size. For small orders, pickup is more economical.

Can I use PVC for hot water lines?
No, standard PVC is not rated for hot water; it can soften and fail. Use CPVC or PEX for hot water supply lines. CPVC is rated up to 180°F, while PEX is rated up to 200°F, making both suitable for residential water heaters.

Is there a minimum order amount?
Most branches do not have a minimum for counter sales, but credit card purchases under a certain amount may incur a small fee. For delivery, there is usually a minimum order to justify the truck run. Ask your local branch for specifics.

Related

How pages are sourced and corrected: Sources and editorial policy.