The Apollo 51000 is a series of professional-grade optical smoke detectors (also known as photoelectric smoke detectors) manufactured by Apollo Fire Detectors Ltd, a UK-based company widely used in commercial fire alarm systems. Unlike household battery-operated smoke alarms you buy at a hardware store, the 51000 series is designed to connect to a central fire alarm control panel via a two-wire loop, providing addressable detection for buildings like offices, hotels, and hospitals.
Background: Apollo and the 51000 Series
Apollo Fire Detectors has been a major player in the fire detection industry since the 1980s. The 51000 series is part of their Discovery family, which was introduced in the late 1990s as a range of intelligent, addressable detectors. The name “51000” refers to the specific model numbers in the series, such as the 51000-100 (standard optical smoke detector) and 51000-200 (with an integral isolator). These detectors are designed to communicate digitally with Apollo’s compatible control panels, such as the XP95 or Discovery protocol panels.
Unlike conventional detectors that simply send a “fire” or “no fire” signal, the 51000 series transmits a continuous analog value representing the smoke level in the chamber. This allows the control panel to make more sophisticated decisions, such as adjusting sensitivity based on time of day or environmental conditions, and to provide early warning before an alarm threshold is reached.
How the Apollo 51000 Works
The 51000 uses a photoelectric sensing chamber. Inside the chamber, an infrared LED emits a beam of light. In normal conditions, the light travels in a straight line and hits a light trap, not the photodiode. When smoke particles enter the chamber, they scatter the light. Some of that scattered light reaches the photodiode, which generates a small electrical current. The detector measures this current and converts it into a digital value that it sends to the control panel.
Key features of the 51000 series include:
- Addressable communication: Each detector has a unique address (set via a rotary switch or software), allowing the panel to identify exactly which detector has activated.
- Remote LED indicator: A built-in LED flashes when the detector is polled, and can be used to locate the detector in a dark room.
- Drift compensation: The detector automatically adjusts for dust buildup in the chamber, reducing false alarms while maintaining sensitivity.
- Isolator option: Models with an integral isolator (e.g., 51000-200) can disconnect themselves from the loop if a short circuit occurs, preventing the whole loop from failing.
Choosing the Right Apollo 51000 Model
There are several variants in the 51000 series, and selecting the right one depends on your system’s needs. The most common are:
- 51000-100: Standard optical smoke detector, no isolator.
- 51000-200: Optical smoke detector with integral isolator.
- 51000-300: Optical smoke detector with a remote test feature (allows testing from the panel).
When choosing, consider whether your loop needs isolation (for critical systems where a short circuit on one device should not disable the entire loop). Also, ensure compatibility with your control panel: the 51000 series works with Apollo’s Discovery protocol, but not with older XP95 panels unless a protocol converter is used.
Common Problems and Troubleshooting
Even professional detectors can experience issues. Here are frequent problems and their solutions:
- False alarms: Dust or steam can trigger the detector. Check for environmental sources (e.g., showers, cooking) and consider adjusting sensitivity via the panel.
- Detector not responding: Verify the address is set correctly and the loop wiring is intact. Use a loop tester to check continuity.
- LED not flashing: The detector may not be powered. Check the base connections and ensure the detector is properly seated.
- Drift compensation warning: If the panel reports a “drift high” warning, the chamber is dirty. Open the detector and gently vacuum the chamber or replace it.
Apollo 51000 vs. Household Smoke Alarms
A common misconception is that the Apollo 51000 is similar to a $20 home smoke alarm. That is incorrect. Here’s a comparison:
- Power: Home alarms are usually battery-powered or 120V AC. The 51000 is powered by the loop (typically 24V DC) and requires a control panel.
- Communication: Home alarms are standalone or interconnected via wirelessly. The 51000 is addressable and communicates digitally.
- Maintenance: Home alarms are often replaced every 10 years. The 51000 is designed for long-term use with replaceable chambers and drift compensation.
- Cost: A single 51000 detector may cost $30-$60, but you also need a compatible control panel (hundreds of dollars).
If you are a homeowner looking for a simple smoke alarm, the Apollo 51000 is not for you. It is intended for commercial fire alarm systems installed by certified technicians.
Costs and Installation
The price of a 51000 detector varies by supplier but typically ranges from $25 to $50 per unit. However, the total cost includes the control panel, wiring, and installation labor. For a small office, you might spend $1,500-$3,000 for a complete system. Installation must be done by a qualified electrician or fire alarm engineer, as it involves loop wiring, addressing, and programming the panel. Always follow local fire codes and regulations.
Safety and Maintenance Tips
To ensure reliable operation:
- Test each detector at least once a year using a test magnet or the panel’s test function.
- Clean the detector chamber every 2-3 years, or when the panel indicates drift high.
- Do not paint the detector or cover it with dust covers after installation.
- Replace the detector after 10 years of service, as recommended by the manufacturer.
Remember that smoke detectors are only one part of a fire safety plan. Always have a fire evacuation plan and ensure detectors are installed in accordance with local codes.
Frequently Asked Questions
Can I use an Apollo 51000 in my home? Technically yes, but it requires a compatible control panel and professional installation. For a typical home, a standard residential smoke alarm is more practical and cost-effective.
What is the difference between the 51000 and the XP95 series? The XP95 series is an older Apollo protocol. The 51000 (Discovery) uses a different communication protocol and offers more advanced features like drift compensation and analog values. They are not directly interchangeable.
How do I reset an Apollo 51000 after an alarm? The detector itself does not have a reset button. You must reset the alarm at the control panel, which will clear the detector’s alarm state.
Does the 51000 detect carbon monoxide? No, it is a smoke detector only. For CO detection, you need a separate carbon monoxide detector or a combined unit.
What does the isolator do? The isolator is a switch that opens if the detector detects a short circuit on the loop, isolating that section so the rest of the loop continues to work. This is crucial for maintaining system integrity during a fault.
Can I replace a 51000 with a different brand? It is not recommended unless the control panel is compatible. Apollo detectors are designed to work with Apollo panels and protocol. Mixing brands can cause communication errors.
Related
- Odyssey Hotel Wellness & Spa Adults Only?
- Odyssey House Bronx: Programs, History, and How to Apply
- Apollo Series 65 Optical Smoke Detector Guide
How pages are sourced and corrected: Sources and editorial policy.