OneStopList

Gods and goddesses

Wall Mounted Ares 2.0: The Full Breakdown

Updated November 21, 2026

Wall Mounted Ares 2.0 is a specific, upgraded version of the Ares wall-mounted electric fireplace heater, distinguished by its slim, space-saving design and improved heating output compared to the original Ares model. It is not a mythological figure or a character from any world tradition; rather, it is a modern home appliance product sold under that name, typically by online retailers specializing in electric fireplaces and infrared heaters.

Background and Product Lineage

The Ares series belongs to a category of electric fireplaces designed to be mounted flush against a wall, eliminating the need for a traditional hearth or chimney. The original Ares model was popular for its minimalist, frameless glass front and realistic LED flame effect. The 2.0 designation signals a second-generation revision, which manufacturers commonly use to indicate upgrades in heating technology, control systems, or physical dimensions. In this case, the 2.0 version typically features a more powerful fan-forced heater, a wider heat distribution angle, and sometimes a quieter motor. Unlike wood-burning or gas fireplaces, the Ares 2.0 produces no real flames, no combustion gases, and no venting requirements, making it a purely decorative and supplemental heating appliance.

How It Works

The Ares 2.0 operates on standard household electricity (usually 120V in North America, 220-240V in Europe and other regions). It combines two primary functions:

  • Flame effect: LED lights reflect off a mirrored or patterned back panel to simulate dancing flames. This effect can be operated with or without heat, allowing year-round ambience.
  • Heating element: A metal coil or ceramic element heats air, which is then pushed into the room by an internal fan. The 2.0 model often uses a more efficient heating element that reaches operating temperature faster than the first version.

The unit is controlled either by buttons on the device itself or a remote control. Some versions include a smart app or voice control compatibility, though this varies by retailer and specific model revision. The heater typically has multiple power settings (e.g., low and high) and an adjustable thermostat that turns the heating element on and off to maintain a set room temperature.

Key Differences from the Original Ares

Consumers searching for the 2.0 are usually comparing it to its predecessor. While exact specifications vary by manufacturer, the 2.0 generally improves on the original in three measurable ways:

  • Heating capacity: The original Ares often covered about 400 square feet; the 2.0 typically covers 500-600 square feet, depending on insulation and ceiling height.
  • Flame realism: The 2.0 uses more LED bulbs and a deeper reflector, producing a brighter and more layered flame effect. Some versions add a color-changing option (blue or orange).
  • Installation: The 2.0 is often thinner (around 4-5 inches deep) and includes a more robust mounting bracket system, making it easier for a single person to hang.

It is important to note that there is no single official manufacturer for the name “Ares” across all markets; the same product name may be used by different brands in different countries. Always check the specific model number and manual for exact wattage and BTU ratings.

How to Choose the Right Wall Mounted Ares 2.0

When selecting an Ares 2.0 or similar wall-mounted electric fireplace, consider these factors:

  • Room size: Match the heater’s BTU (British Thermal Units) rating to your room. A rough guide is 20 BTU per square foot of living space. A 1500W heater produces about 5,100 BTU, sufficient for a small to medium bedroom or home office.
  • Power source: Most units plug into a standard outlet, but some require hardwiring. Check whether the cord length reaches a convenient outlet without using an extension cord, which is generally not recommended for high-wattage heaters.
  • Flame settings: Decide if you want a fixed flame color or adjustable options. Some models allow you to dim the flame brightness or turn off the ember bed.
  • Remote and thermostat: A programmable thermostat is more energy-efficient than a simple on/off switch, as it cycles the heater rather than running it continuously.
  • Noise level: Fan-forced heaters produce a low hum. If you are sensitive to noise, look for models that advertise whisper-quiet fans or check reviews for decibel ratings.

Common Problems and Misconceptions

One frequent misconception is that the Ares 2.0 is a primary heating source capable of warming an entire house. In reality, it is a supplemental heater best used to warm one room or zone. Another common issue is the flame effect becoming less visible over time due to dust accumulation on the LED lenses or reflector; cleaning the glass and interior (after unplugging and cooling) restores brightness. Users also report that the remote control has a short range (often 10-15 feet) and requires direct line of sight. A more serious concern is electrical load: plugging the unit into an overloaded circuit can trip breakers. The manual typically specifies that the heater should be on a dedicated 15-amp circuit.

Cost and Energy Efficiency

Electric fireplaces are generally inexpensive to run compared to gas or wood, but they are not the most efficient way to heat a home because electricity is often more expensive than natural gas per unit of heat. A 1500W heater running on high for 8 hours consumes 12 kilowatt-hours (kWh). At an average electricity rate of $0.15 per kWh, that costs about $1.80 per day. The purchase price of an Ares 2.0 varies widely, typically ranging from $150 to $400 depending on size, features, and brand. Because they use resistance heating, their efficiency is close to 100% at converting electricity to heat, but the cost per BTU is higher than a heat pump or gas furnace.

Safety and Installation Guidelines

Wall-mounted electric fireplaces are safe when installed correctly, but they are not zero-risk appliances. Follow these essential safety points:

  • Mounting: The unit must be attached to wall studs, not just drywall, because it can weigh 30-50 pounds. Use the included anchor bolts and ensure the bracket is level.
  • Clearance: Maintain at least 3 feet of clearance from the front of the heater to any combustible materials like curtains, bedding, or furniture. The top and sides usually require 6-12 inches of clearance.
  • Never cover: Do not place clothing, towels, or rugs on or against the unit. The exhaust vents on the front or top must remain unobstructed.
  • Unplug when not in use: While the unit has an automatic overheat shutoff, unplugging it during long absences is a prudent habit.
  • Children and pets: The glass front can become hot to the touch during operation, though it is cooler than a traditional fireplace. Some models have a cool-touch glass option; verify this before purchase if you have young children.

Alternatives to the Ares 2.0

If the Ares 2.0 does not fit your needs, consider these common alternatives:

  • Freestanding electric stoves: These look like traditional wood stoves but sit on the floor. They often have higher BTU outputs and do not require wall mounting.
  • Infrared panel heaters: These are flat panels that radiate heat directly to objects and people, rather than warming the air. They are quieter and more energy-efficient in well-insulated rooms, but they do not provide a flame effect.
  • Wall-mounted gas fireplaces: These offer real flames and higher heat output, but require a gas line, venting, and professional installation. They are more expensive upfront and have ongoing fuel costs.
  • Electric fireplace inserts: If you have an existing wood-burning fireplace, an insert can convert it to electric, providing the look of a fire without the chimney maintenance.

Frequently Asked Questions

Is the Ares 2.0 safe to leave on overnight?
Most models have an overheat sensor and a timer function (usually 1-9 hours). While it is generally safe to run while you sleep, the manufacturer’s manual often advises against leaving any space heater unattended for extended periods. Use the timer to shut it off automatically.

Can I install the Ares 2.0 myself?
Yes, if you are comfortable with a drill and a level. The installation involves marking stud locations, drilling pilot holes, and securing the bracket. However, if you are unsure about wall structure or electrical wiring (for hardwired models), hire a licensed electrician.

Does the flame effect work without heat?
Yes, the Ares 2.0 allows you to run the flame effect independently of the heater. This is a key feature for using the fireplace as ambience in warmer months.

How loud is the fan?
On the low heat setting, the fan is usually around 40-45 decibels, comparable to a quiet conversation or a refrigerator hum. On high heat, it may reach 50-55 decibels, which is noticeable but not disruptive for most users.

Why does my Ares 2.0 not heat as well as expected?
This is usually due to room size exceeding the heater’s capacity, poor insulation, or high ceilings. Also check that the air intake and exhaust vents are not blocked by dust or furniture. Clean them with a soft brush or vacuum attachment.

What is the lifespan of the LED bulbs?
LED bulbs in these units are rated for roughly 25,000-50,000 hours of use. If a bulb fails, it is often not user-replaceable in the Ares 2.0, meaning the entire flame module may need servicing. This is rare under normal use.

Related

How pages are sourced and corrected: Sources and editorial policy.