OneStopList

Gods and goddesses

Strength Level Standards: Bench, Squat, Deadlift

Updated November 17, 2026

Strength level standards are reference points that tell you how your one-rep max (1RM) on lifts like the bench press, squat, and deadlift compares to other people of the same body weight, sex, and training experience. These standards are usually expressed as a ratio of weight lifted to body weight (e.g., 1.5x bodyweight bench press), and they come from aggregated data from strength training apps, powerlifting federations, and coaching resources.

Why Strength Standards Exist

Strength standards fill a practical need: they give lifters a way to set goals and track progress beyond just “lifting more than last week.” Without a reference, a 150-pound person has no idea whether a 225-pound bench press is impressive or average. Standards convert raw numbers into categories like beginner, novice, intermediate, advanced, and elite, which are commonly defined as:

  • Beginner: less than 6 months of consistent training; can lift roughly 0.5–0.75x bodyweight on bench, 0.75–1x on squat, and 1–1.25x on deadlift.
  • Novice: 6–12 months; bench ~0.75–1x, squat ~1–1.25x, deadlift ~1.25–1.5x bodyweight.
  • Intermediate: 1–2 years; bench ~1–1.25x, squat ~1.5–1.75x, deadlift ~1.75–2x bodyweight.
  • Advanced: 3+ years; bench ~1.5x, squat ~2x, deadlift ~2.5x bodyweight.
  • Elite: competitive powerlifters; bench ~2x, squat ~2.5–3x, deadlift ~3–3.5x bodyweight.

These numbers are not universal. They vary by sex (women typically lift about 60–70% of what men lift at the same body weight), by age (standards often decline after 40), and by the equipment used (a raw lift with no bench shirt is different from a geared lift).

How Standards Are Calculated

Most strength standards come from one of two sources: large datasets from training apps or powerlifting meet results. The most widely cited dataset is from Strength Level (strengthlevel.com), which aggregates user-submitted 1RM entries and calculates percentile rankings by body weight and sex. Another common source is the ExRx.net standards, which are based on a mix of published research and coaching experience. Powerlifting federations like the IPF also publish official world records and qualifying totals, which define the elite end of the spectrum.

The key metric is the ratio of lift to body weight. For example, a 200-pound man who benches 300 pounds has a 1.5x bodyweight bench. That same ratio for a 150-pound man (225-pound bench) is considered more impressive because lighter lifters tend to lift slightly more relative to their body weight. This is why standards always account for body weight, not just absolute weight.

Bench Press Standards

The bench press is the most commonly tested upper-body lift. For an untrained adult male, a typical 1RM is about 0.5–0.75x body weight. After a year of training, most men reach 1x body weight, which is often cited as a major milestone. A 1.5x bodyweight bench is considered advanced by most standards, and 2x is elite. For women, the corresponding numbers are lower: untrained is ~0.25–0.5x, intermediate is ~0.75x, advanced is ~1x, and elite is ~1.5x body weight.

These numbers assume a raw bench press with a standard grip and no bench shirt. In equipped powerlifting, where a shirt adds significant support, elite lifters can bench over 3x body weight, but that is not comparable to a raw lift.

Squat and Deadlift Standards

The squat and deadlift are the two main lower-body lifts. For men, a 1x bodyweight squat is a common early goal, 1.5x is intermediate, 2x is advanced, and 2.5x is elite. Deadlift standards are slightly higher because the deadlift typically allows you to lift more than the squat: 1.5x is intermediate, 2x is advanced, 2.5x is elite. For women, the same ratios are roughly 0.75x (squat) and 1x (deadlift) for intermediate, 1.5x for advanced, and 2x for elite.

These numbers assume a full range of motion (parallel squat, deadlift from the floor) and no lifting straps or suit. Partial reps or sumo stance can inflate numbers, so standards are only meaningful when the lift is performed to a defined standard.

How to Test Your 1RM Safely

Testing your one-rep max is the most direct way to compare yourself to standards, but it carries risk of injury if done improperly. The safest method is to work up to a heavy single over several warm-up sets, with a spotter or safety pins in a power rack. A common protocol:

  1. Warm up with 5–10 minutes of light cardio and dynamic stretches.
  2. Do 3–5 warm-up sets of 5 reps at 40–60% of your estimated max.
  3. Do 2–3 sets of 3 reps at 70–80%.
  4. Do 1 rep at 85–90%, then 1 rep at 95%, then attempt your 1RM.
  5. Rest 3–5 minutes between heavy attempts.

If you do not know your estimated max, use a formula like the Epley equation: 1RM = weight × (1 + 0.0333 × reps). For example, if you can bench 185 pounds for 5 reps, your estimated 1RM is 185 × (1 + 0.0333 × 5) = 185 × 1.1665 = 216 pounds. This is an estimate, not exact, but it lets you compare without risking a maximal lift.

Common Misconceptions

One common myth is that strength standards are the same for everyone. They are not. Body weight, sex, age, and limb length all affect what is achievable. A 6’4″ lifter with long arms will have a harder time benching than a 5’8″ lifter with short arms, but may deadlift more. Standards are averages, not absolutes.

Another misconception is that “intermediate” means you have trained for a specific number of years. In reality, training consistency, programming, and genetics matter more than time. Some lifters reach a 2x bodyweight squat in 18 months; others take 5 years. The categories are based on strength levels, not time served.

Using Standards for Programming

Strength standards are most useful when you use them to set realistic training goals. If you are a novice, aiming for a 1x bodyweight bench is a sensible target. Once you reach intermediate, you might shift to a periodized program with specific percentages of your 1RM. For example, an intermediate lifter might train at 70–80% of 1RM for 5×5, then progress to 85–90% for triples. Standards help you decide when to move from a linear progression (adding weight every session) to a more complex program.

They also help you identify weak points. If your squat is 1.5x bodyweight but your deadlift is only 1.5x, your posterior chain may be underdeveloped. If your bench is 1.2x but your overhead press is only 0.5x, your shoulders may be a limiting factor.

Frequently Asked Questions

What is a good bench press for my weight?

For an average 180-pound man, a 180-pound bench (1x bodyweight) is a solid novice-to-intermediate milestone. A 225-pound bench (1.25x) is considered intermediate, and 275 pounds (1.5x) is advanced. For a 150-pound man, a 225-pound bench is already advanced (1.5x). For women, a 100-pound bench at 150 pounds bodyweight (0.67x) is intermediate.

Do strength standards change with age?

Yes. Most standards are based on adults under 40. After 40, absolute strength tends to decline, but relative strength (adjusted for body weight) can stay stable if you train consistently. Some federations have age-adjusted standards, but the common “beginner to elite” scale does not account for age, so older lifters should compare themselves to others in their age group, not to 25-year-olds.

Are powerlifting standards the same as general fitness standards?

No. Powerlifting standards are based on meet results with strict rules (e.g., pause on the bench, depth in the squat, no straps). General fitness standards are looser and often include partial reps or machines. A 225-pound bench in a commercial gym may not count in a powerlifting meet if the bar does not touch the chest or the feet move. Always specify which standard you are comparing to.

How long does it take to reach a 2x bodyweight squat?

For most men, 2x bodyweight squat is an advanced goal that takes 3–5 years of consistent training. Some reach it in 2 years with good genetics and programming, others never do. For women, 2x bodyweight is elite and may take 5+ years. It is not a realistic short-term goal for most beginners.

Can I use strength standards if I am a beginner?

Yes, but focus on the beginner and novice categories first. Do not compare yourself to elite lifters. A better approach is to track your own progress: if you are adding weight to the bar every week or two, you are on the right track. Standards are a map, not a judgment.

What if I lift more than the “elite” standard?

That means you are in the top 1–2% of lifters, which is genuinely rare. Elite standards are not ceilings; they are benchmarks that define the top tier. If you exceed them, you are likely competitive in local or regional powerlifting meets.

Related

How pages are sourced and corrected: Sources and editorial policy.