Shim and spacer supplies are the assortment of thin, precisely-thicknessed strips, sheets, and rings used to fill gaps, align components, or distribute load in mechanical assemblies. These supplies are essential across construction, manufacturing, automotive, and DIY projects, and are available in metals, plastics, and composites from industrial distributors and hardware stores.
What Are Shims and Spacers?
Shims and spacers are both used to fill space, but they serve different purposes. A shim is typically a thin, tapered or flat piece used to adjust fit or alignment—for example, shimming a door frame to make it plumb or aligning a machine base. A spacer is usually a uniform-thickness ring or block that maintains a set distance between two parts, like a bearing spacer or a standoff in electronics.
Common materials include:
- Steel – strong and durable, used in heavy machinery and structural applications.
- Stainless steel – corrosion-resistant, ideal for marine or food-processing environments.
- Brass – non-magnetic and corrosion-resistant, often used in electrical and marine settings.
- Aluminum – lightweight and corrosion-resistant, good for aerospace and automotive.
- Plastic (nylon, PTFE, PVC) – non-conductive, lightweight, and resistant to chemicals.
- Rubber or silicone – flexible, provides vibration damping or sealing.
- Composite – laminated shims that you peel to the exact thickness needed.
How Shims and Spacers Work
Shims and spacers work by filling a gap or creating a precise offset. In a bolted joint, a spacer maintains the correct distance between two flanges, preventing crushing or misalignment. A shim, on the other hand, can be used to level a machine by adding thickness under one foot, or to adjust the clearance between a gear and a shaft.
Precision is key. Shims are often sold in thickness increments of 0.001 inch (0.025 mm) or even finer. Laminated shims consist of multiple thin layers bonded together; you peel off layers until you reach the desired thickness, which is useful when the exact gap is unknown.
How to Choose the Right Shim or Spacer
Choosing the right product involves several factors:
- Load and strength – For heavy loads, use steel or stainless steel; for light duty, plastic may suffice.
- Environment – Consider moisture, chemicals, and temperature. Stainless or plastic resists corrosion; PTFE handles high temperatures.
- Electrical properties – If you need insulation, choose nylon or another non-conductive plastic.
- Thickness tolerance – For precise alignment, you need shims with tight thickness tolerances (e.g., ±0.001 inch).
- Shape – Flat sheets, strips, washers, or custom-cut rings.
- Certifications – In aerospace or food processing, you may need materials that meet specific standards like ASTM or FDA.
For example, if you are aligning a pump motor, you would likely use stainless steel shims because they resist corrosion and can handle the vibration. For a hobby electronics project, plastic spacers are cheap and non-conductive.
Common Problems and Misconceptions
One common mistake is using a spacer where a shim is needed, or vice versa. A spacer is not meant to be compressed; a shim can be slightly compressible. Another issue is using the wrong material—for instance, using aluminum shims in a high-corrosion environment can lead to galvanic corrosion.
Another misconception is that shims are only for leveling. In fact, they are also used for adjusting bearing preload, aligning conveyor belts, and even in musical instruments to adjust the action of guitar strings.
People often ask: “Can I just use a washer as a spacer?” The answer is sometimes, but washers have a hole and are not always the right thickness or material. A solid spacer is better when you need a precise, uniform gap.
Shim and Spacer Supplies: Where to Buy
You can buy shims and spacers from several types of suppliers:
- Industrial distributors – MSC Industrial, Grainger, McMaster-Carr offer a huge range of sizes and materials.
- Specialty shim manufacturers – Companies like Accutrex or Shim Source produce custom shims and precision shim stock.
- Hardware stores – For common sizes, Home Depot or Ace Hardware carry assorted shim packs.
- Online marketplaces – Amazon and eBay have a wide variety, but check the material and tolerance carefully.
- Automotive parts stores – For engine or suspension shims, AutoZone or NAPA have specific products.
When ordering, specify the material, thickness, dimensions, and quantity. Custom shapes are available from many manufacturers, but there may be a minimum order.
Costs and Availability
Costs vary widely. A pack of assorted plastic spacers may cost under $10. A set of precision steel shims (0.001–0.125 inch) might run $20–$50. Custom-cut stainless steel shims can be $50–$200 depending on size and quantity. Laminated shim stock is sold by the sheet or roll, often around $15–$40.
Availability is generally good. Common sizes are in stock at most hardware stores. Specialty materials like titanium or exotic alloys may require special ordering from industrial suppliers.
Safety and Best Practices
When using shims and spacers, follow these safety tips:
- Always use the correct size and material for the load; an undersized shim can crush or deform.
- In structural applications, consult engineering guidelines—do not stack too many thin shims; a single thicker shim is stronger.
- Use corrosion-resistant materials in outdoor or wet environments.
- When cutting shims, wear safety glasses and use proper tools; metal shims can have sharp edges.
- For electrical applications, ensure the spacer is rated for the voltage and temperature.
Alternatives to Shims and Spacers
In some cases, you can use alternatives:
- Adjustable feet – For leveling machinery, threaded feet allow fine adjustment without shims.
- Epoxy or grout – For permanent leveling of machine bases, epoxy grout can fill gaps.
- Washers – For simple spacing, washers can work if the thickness is acceptable.
- 3D printed spacers – For prototyping, you can print custom spacers in plastic.
- Shim washers – These are washers that are also shims, combining both functions.
Frequently Asked Questions
What is the difference between a shim and a spacer?
A shim is used to adjust fit or alignment, often by being slightly compressible or tapered. A spacer maintains a fixed distance between two parts and is usually not meant to be compressed. In practice, the terms are sometimes used interchangeably, but the intended function differs.
Can I use a regular washer as a spacer?
Yes, in many low-precision applications, a washer can serve as a spacer. However, washers have a hole and may not have the exact thickness or uniformity needed. For precise spacing, use a solid spacer or a precision shim washer.
What are laminated shims and why use them?
Laminated shims are made of multiple thin layers (often 0.001 or 0.002 inch each) bonded together. You peel off layers to achieve the exact thickness needed, which is useful when the gap is unknown or when you need to make fine adjustments on-site.
How do I measure the gap for a shim?
Use a feeler gauge to measure the gap. Insert the gauge into the gap until it fits snugly, then read the thickness. For larger gaps, you can use a caliper or a taper gauge. Always measure at multiple points to account for unevenness.
Are plastic shims as strong as metal shims?
No, plastic shims are generally weaker and more compressible than metal. They are suitable for light-duty applications, vibration damping, or where electrical insulation is needed. For heavy loads, use steel or stainless steel shims.
Can I stack multiple shims to get a custom thickness?
Yes, stacking is common, but avoid stacking too many thin shims because the stack may compress or shift. It is better to use one thicker shim if possible. For precision, use a laminated shim that you peel to the exact thickness.
Related
- Bradenton FL Fishing Charters: What You Need to Know
- Childbirth Yoga Classes in Jurong East: Where & How
- Backyard Vinyl: Chaos and Creation Explained
How pages are sourced and corrected: Sources and editorial policy.