OneStopList

Gods and goddesses

Rhea Iron Generic Name: What Is It Called?

Updated November 21, 2026

The generic name for Rhea iron is ferrous sulfate. Rhea is a brand name for a specific formulation of this common iron supplement, which is used to treat or prevent iron deficiency anemia. If your prescription or bottle says Rhea, the active ingredient is ferrous sulfate, and any pharmacy can substitute a generic version unless your doctor has specified otherwise.

What Is Ferrous Sulfate?

Ferrous sulfate is a form of iron that your body can absorb relatively easily. It is the most widely prescribed and over-the-counter iron supplement worldwide because it is inexpensive, stable, and effective at raising iron levels in the blood. The compound contains iron in the +2 oxidation state (ferrous), which is the form the human intestine absorbs best, compared to ferric iron (+3) found in some other supplements.

In medical terms, ferrous sulfate is often written as FeSO4·7H2O (heptahydrate) in its common crystalline form. It is also sold under many other brand names, including Fer-In-Sol, Feosol, and Slow-FE, though those may have different coatings or release mechanisms. The key point is that the active molecule is identical across all these products.

Why Does Rhea Have a Generic?

Rhea is a brand name owned by a pharmaceutical company, but the patent on ferrous sulfate itself expired decades ago. Once a drug’s patent ends, any manufacturer can produce the same chemical compound and sell it under its chemical name (the generic name) or under a different brand. This is why you will see bottles labeled simply “ferrous sulfate” next to the Rhea brand on the same pharmacy shelf.

Generic drugs are required by law to have the same active ingredient, strength, dosage form, and route of administration as the brand-name product. They must also be bioequivalent, meaning they release the drug into your bloodstream at the same rate and to the same extent. So a generic ferrous sulfate tablet will work exactly the same as Rhea, though the inactive fillers, coatings, or colors may differ.

How Ferrous Sulfate Works in the Body

Iron is a critical component of hemoglobin, the protein in red blood cells that carries oxygen from your lungs to every tissue. When your iron stores are low, your body cannot make enough hemoglobin, leading to anemia with symptoms like fatigue, weakness, pale skin, and shortness of breath.

When you swallow ferrous sulfate, the stomach acid dissolves the tablet, releasing ferrous ions. These ions are absorbed primarily in the duodenum and upper jejunum through a transport protein called DMT1. Once inside the intestinal cell, iron is either stored as ferritin or transferred into the bloodstream via ferroportin, where it binds to transferrin and travels to the bone marrow for red blood cell production.

Key factors that affect absorption:

  • Vitamin C: Taking ferrous sulfate with orange juice or a vitamin C supplement increases absorption significantly.
  • Calcium and tannins: Milk, cheese, tea, and coffee can reduce absorption, so take iron at least two hours apart from these.
  • Empty stomach: Iron is best absorbed on an empty stomach, but many people take it with food to avoid nausea.
  • Gastric acidity: People taking antacids or proton-pump inhibitors may absorb less iron.

Common Dosages and Forms

Ferrous sulfate is available in several strengths, usually expressed as the amount of elemental iron, not the weight of the whole salt. For example, a 325 mg tablet of ferrous sulfate contains about 65 mg of elemental iron. Common formulations include:

  • Tablets: 325 mg (65 mg elemental iron), often taken once or twice daily.
  • Liquid drops: Often used for infants and children, with a dropper that measures specific doses.
  • Extended-release capsules: Designed to release iron slowly to reduce stomach upset, but they may be absorbed less efficiently.

For iron deficiency anemia in adults, the typical dose is 100–200 mg of elemental iron per day, divided into two or three doses. Your doctor will determine the exact dose based on your blood tests and body weight. Never double a dose if you miss one, as too much iron can be toxic.

Common Side Effects and How to Manage Them

Ferrous sulfate is well-known for causing gastrointestinal side effects, which are the main reason people stop taking it. The most common are:

  • Constipation (very common)
  • Nausea
  • Dark or black stools (harmless, but alarming if you don’t expect it)
  • Stomach cramps
  • Diarrhea (less common)

To reduce these effects, you can take the supplement with a small amount of food, use a stool softener like docusate, increase water and fiber intake, or switch to a slow-release formulation. If side effects are severe, your doctor may suggest a lower dose or a different iron salt, such as ferrous gluconate or ferrous fumarate, which contain less elemental iron per tablet but may be gentler.

Rhea vs. Other Iron Supplements

Besides ferrous sulfate, you will encounter other iron compounds on the market. Here is how they compare:

  • Ferrous fumarate: Contains 33% elemental iron (about 106 mg per 325 mg tablet). Similar absorption to sulfate, often slightly better tolerated.
  • Ferrous gluconate: Contains 12% elemental iron (about 38 mg per 325 mg tablet). Gentler on the stomach but requires more tablets for the same dose.
  • Ferric citrate or ferric maltol: Newer options with different absorption pathways; sometimes used for people with chronic kidney disease or those who cannot tolerate ferrous salts.
  • Heme iron polypeptide: Derived from animal hemoglobin, absorbed differently and may have fewer GI side effects, but much more expensive.

For most people, ferrous sulfate (Rhea or generic) is the first-choice treatment because it offers the best balance of cost, efficacy, and availability. The brand name does not make it more effective than the generic.

Cost and Availability

Generic ferrous sulfate is one of the cheapest medications available. A month’s supply typically costs between $3 and $10 without insurance, whereas the Rhea brand might cost two to three times more. Because the generic is so inexpensive, most insurance plans will cover it without a copay or with a minimal copay. You can buy it over the counter at any pharmacy, grocery store, or online retailer without a prescription, though higher-dose versions may require a prescription in some countries.

If you have a prescription for Rhea, you can ask the pharmacist to fill it with generic ferrous sulfate. In most places, they will do this automatically unless your doctor writes “dispense as written” on the prescription. The only reason to insist on the brand is if you have a known allergy to an inactive ingredient in the generic, which is rare.

Safety, Overdose, and Storage

Iron is essential, but it is also toxic in high doses, especially for children. The lethal dose of elemental iron is roughly 200–250 mg per kilogram of body weight, so a single 65 mg tablet can be dangerous for a toddler. Always store iron supplements in a child-proof container, out of reach of children, and never leave them on a counter.

Symptoms of iron overdose include nausea, vomiting (often with blood), abdominal pain, diarrhea, and lethargy, progressing to shock and organ failure. If you suspect an overdose, call poison control immediately. Do not induce vomiting unless instructed.

For normal use, do not exceed the dose your doctor prescribed. Taking extra iron “just in case” can lead to iron overload, which damages the liver, heart, and pancreas over time. People with hemochromatosis (a genetic condition causing excess iron absorption) should not take iron supplements at all.

Store ferrous sulfate in a cool, dry place, away from moisture and direct sunlight. Keep the tablets in their original container with the desiccant packet, and do not transfer them to a pill organizer for more than a week, as humidity can degrade them.

Frequently Asked Questions

Is Rhea the same as ferrous sulfate?

Yes. Rhea is a brand name for ferrous sulfate. The active ingredient is identical to any generic ferrous sulfate tablet, so they have the same effect on your body.

Can I take Rhea or ferrous sulfate with food?

Yes, but food reduces absorption. Taking it on an empty stomach increases absorption, but if that causes nausea, take it with a small amount of food, avoiding dairy, tea, or coffee. The key is consistency: take it the same way every day.

How long does it take for ferrous sulfate to work?

You may feel more energy within one to two weeks, but your hemoglobin levels take about four to eight weeks to return to normal. Your doctor will likely recheck your blood after a month or two to adjust the dose. Continue taking it as prescribed even if you feel better.

Why are my stools black when I take iron?

Black stools are a harmless side effect of ferrous sulfate. The unabsorbed iron reacts with sulfur in your intestines to form iron sulfide, which is black. It is not a sign of bleeding unless you also have dizziness, abdominal pain, or the stool is tarry and foul-smelling.

Can I take ferrous sulfate with other vitamins?

Yes, but avoid taking it at the same time as calcium supplements, magnesium, zinc, or antacids, as they compete for absorption. Vitamin C enhances absorption, so taking iron with orange juice is a good idea. Multivitamins often contain iron, so check the label to avoid double dosing.

What if I miss a dose?

Take the missed dose as soon as you remember, unless it is almost time for your next dose. In that case, skip the missed dose and resume your normal schedule. Never take two doses at once, as this increases the risk of stomach upset and iron toxicity.

Related

How pages are sourced and corrected: Sources and editorial policy.