Yes, the Rep Ares 2.0 can be wall mounted. The frame includes pre-drilled holes and the manufacturer sells a dedicated wall-mount bracket kit, though the bracket is sold separately from the base rack. This article explains exactly what the wall-mount option involves, what you need to know before installing it, and how it compares to the floor-standing version.
Background: What the Rep Ares 2.0 Is
The Rep Ares 2.0 is a cable crossover machine designed for home gyms. It replaced the original Ares model and added a few upgrades: a wider pulley stance, a more stable frame, and a revised weight stack system. The machine is essentially a functional trainer—two adjustable pulleys on vertical columns—that lets you do hundreds of exercises like cable crossovers, lat pulldowns, rows, and triceps pushdowns. It is known for being compact compared to commercial gym equipment, which is why wall mounting is a popular option for people with limited floor space.
The 2.0 version ships as a floor-standing unit with a base crossbar. But Rep offers an optional wall-mount conversion kit that removes the need for that base, letting you bolt the two columns directly to a wall. This is not a DIY modification; it is an official accessory designed for the 2.0 frame.
How the Wall Mount Works
The wall-mount kit replaces the floor base with two steel brackets that attach to the back of each column. You mount those brackets to a wall using heavy-duty lag bolts (included in the kit). The columns then hang vertically, with about 6 inches of clearance between the wall and the back of the machine so the weight stacks can travel freely.
Key installation points:
- Wall type: The kit is designed for solid concrete or wood stud walls. Drywall alone will not hold the weight—each column with loaded plates weighs roughly 200–250 lbs, and dynamic forces during exercise are higher.
- Stud spacing: The bracket holes are spaced to fit standard 16-inch on-center studs. If your studs are 24 inches apart, you may need to add plywood backing or use concrete anchors.
- Tools needed: A drill, a level, a socket wrench, and a stud finder. The kit includes bolts, washers, and spacers, but not the drill bits.
- Height: You must mount the brackets at exactly the same height on both columns, or the pulleys will be misaligned. Rep recommends measuring from the floor to the bottom of each bracket and using a laser level if you have one.
The wall-mount version does not include the floor crossbar, so the machine has no footprint—you gain back roughly 2 feet of floor space compared to the floor-standing model.
Choosing Between Wall-Mount and Floor-Standing
The decision comes down to space, wall strength, and whether you plan to move. Here are the factors that matter:
- Floor space: Wall-mount frees up the entire floor area under and around the machine. If your gym is a spare bedroom or garage with limited square footage, that is a big win.
- Wall integrity: You need a wall that can handle lateral pull forces. A concrete basement wall or a framed wall with 2×6 studs is ideal. A thin interior partition wall is not safe.
- Portability: Floor-standing can be unbolted and moved easily. Wall-mount requires patching holes and re-drilling in a new location.
- Stability: The floor-standing version is slightly more stable for heavy unilateral work (like single-arm cable rows) because the base spreads the load. The wall-mount is fine for most users but can flex if you pull hard sideways.
- Cost: The wall-mount kit is about $200–250 USD, while the floor-standing base is already included in the base price. If you buy the wall-mount version, you save on shipping weight but pay extra for the kit.
Most home gym owners choose wall-mount when they have a dedicated wall that is structurally sound and they want to maximize open floor area. If you rent or plan to move within a few years, floor-standing is simpler.
Common Problems and Misconceptions
A frequent misconception is that wall-mounting the Ares 2.0 makes it less smooth or less functional. That is not true—the pulleys and weight stacks operate identically. The only difference is the mounting interface. Another misconception is that you can mount it to any wall. That is false: the manual explicitly states that the wall must be capable of supporting at least 500 lbs of dynamic load, and drywall alone fails that test.
Real problems users report:
- Misaligned brackets: If one bracket is even 1/4 inch higher than the other, the cable will rub against the pulley housing. Solution: measure twice, drill once, and use a level.
- Studs not where you expect: In older homes, studs may be 16 inches on center but offset by a few inches near doors or windows. You may need to shift the entire machine left or right to hit studs.
- Weight stack clearance: The wall-mount kit spaces the columns about 6 inches from the wall, but if you have baseboards or outlet boxes protruding, you may need to add shims.
- Noise: Wall-mounted machines transmit vibration to the wall, so you might hear more rattling than with the floor-standing version. Rubber washers (included) help but do not eliminate it.
One genuine limitation: the wall-mount version cannot be used with the optional lat pulldown seat attachment that connects to the floor base. If you want that attachment, you need the floor-standing model.
Costs and What’s Included
The Rep Ares 2.0 wall-mount kit is sold separately, not bundled with the machine. As of recent pricing, the kit costs around $200–250 USD, plus shipping. The machine itself (without weight plates) is around $1,500–1,800 USD depending on the pulley configuration and whether you buy the weight stack option. The wall-mount kit includes:
- Two steel wall brackets (one per column)
- Lag bolts, washers, and spacers
- Rubber vibration pads
- An instruction manual with drill templates
You will need to supply the drill, bits, a level, and possibly a stud finder. If your wall is concrete, you will need masonry drill bits and concrete anchors, which are not included. Total installed cost is typically $100–200 more than the floor-standing version once you factor in the kit and any additional anchors.
Safety and Installation Best Practices
Wall-mounting a heavy cable machine is not dangerous if done correctly, but mistakes can cause serious injury or property damage. Follow these rules:
- Always mount into solid wood studs (minimum 2×4) or concrete. Never use drywall anchors alone.
- Use a stud finder to locate the center of each stud, not the edge. Drilling off-center weakens the hold.
- Pre-drill pilot holes smaller than the lag bolts to prevent splitting the wood.
- Use a torque wrench to tighten bolts to the spec in the manual (usually 40–50 ft-lbs). Over-tightening can strip the threads.
- After mounting, test with a gentle pull on each column before loading the weight stacks. If you see any movement, stop and re-check the bolts.
- Check the bolts every few months—vibration can loosen them over time.
If you are not comfortable with a drill and level, hire a professional handyman. The cost is worth the peace of mind.
Alternatives to Wall-Mounting
If wall-mounting is not feasible, you have other options:
- Floor-standing with the base: The default version. It takes up about 2 feet by 6 feet of floor space but requires no wall modification.
- Corner placement: You can place the floor-standing version in a corner to reduce its footprint visually, though it still occupies the same floor area.
- Compact functional trainers: Other brands like Titan Fitness or Bells of Steel make similar machines with smaller footprints, some of which are designed for corner mounting without a wall bracket.
- Free weights: If space is extremely tight, a set of adjustable dumbbells and a bench can cover many of the same exercises, though not cable-specific movements like crossovers.
Wall-mounting is the best way to keep the full range of cable exercises while reclaiming floor space, but it is not the only route.
Frequently Asked Questions
Does the wall-mount kit work with the original Ares (not 2.0)? No. The 2.0 frame has different bolt patterns and column spacing. The kit is specifically for the 2.0 model. If you have the original, contact Rep for compatibility options.
Can I wall-mount the Ares 2.0 to a brick wall? Yes, but you need masonry anchors and a hammer drill. The kit’s lag bolts are for wood; for brick or concrete, you must buy sleeve anchors rated for at least 250 lbs each. Follow the anchor manufacturer’s drilling instructions.
How much floor space do I save? The floor-standing version is about 24 inches deep and 72 inches wide. Wall-mounting removes the 24-inch depth entirely, so you save roughly 12 square feet of floor area.
Will the wall-mount version shake during heavy use? Some vibration is normal, especially during explosive movements like cable chops. The rubber pads reduce it, but if the wall is not perfectly flat, you may need extra shims. If you feel excessive movement, check that all bolts are torqued to spec.
Can I convert my floor-standing Ares 2.0 to wall-mount later? Yes. The floor base unbolts from the columns, and you can buy the wall-mount kit separately. The process takes about an hour with two people. You will need to patch the holes in the floor if you ever revert.
Is the wall-mount version as stable as the floor-standing? For most exercises, yes. The difference appears only during heavy single-arm pulling with maximum weight. The floor base distributes the load over a wider area, so it feels slightly more solid. If you do a lot of heavy unilateral work, stick with floor-standing.
Related
- Alien Sun Mythology: Origins and Meaning
- Grocery Delivery in Clementi: Options & How to Order
- Food Hero Careers: Real Jobs & How to Start
How pages are sourced and corrected: Sources and editorial policy.