Reeds (common reed, Phragmites australis) are aggressive wetland grasses that can quickly take over a field, crowding out pasture, crops, or native plants. This guide covers practical, step-by-step methods to kill and remove reeds, from small patches to larger infestations. You will need to choose between chemical and non-chemical approaches depending on your land size, time, and whether the area is near water. Before starting, check local regulations: many regions restrict herbicide use near wetlands or require permits for mechanical removal in sensitive habitats.
What You’ll Need
- For mechanical removal: heavy-duty gloves, a sharp spade or shovel, a brush cutter or scythe, and a rake or pitchfork. For large areas, consider a tractor with a mower or tiller.
- For chemical control: a glyphosate-based herbicide (e.g., Roundup) labeled for aquatic or wetland use, a sprayer (backpack or hand-held), and protective clothing (long sleeves, pants, goggles, gloves).
- For smothering: heavy black plastic sheeting (6 mil or thicker), landscape staples or rocks to hold it down, and a utility knife.
- Optional: a chainsaw or reciprocating saw for thick, woody reed stems, and a burn permit if you plan to burn dry reed piles.
Step-by-Step
- Identify the reeds and assess the area. Confirm you are dealing with reeds, not cattails or sedges. Common reeds grow 5–10 feet tall with feathery plumes in late summer. Walk the field and mark the extent of the infestation. Note any water sources, drainage ditches, or protected areas nearby.
- Choose your control method based on the infestation size. For small patches (under 100 square feet), manual digging is feasible. For medium to large areas, combine mowing with herbicide or smothering. If the reeds are near open water, select an aquatic-approved herbicide.
- Time your work correctly. The best time for chemical control is late summer to early fall (August to October in the Northern Hemisphere), when the reeds are sending sugars down to their roots. For mechanical removal, early spring before new growth or late fall after the first frost is easiest, but avoid disturbing soil during nesting season of ground-nesting birds.
- Cut or mow the reeds first (if using herbicide). If the reeds are tall and dense, mow them down to about 6 inches above the ground. This reduces the amount of foliage you need to spray and forces the plant to produce fresh, tender leaves that absorb herbicide better. Wait 2–3 weeks for regrowth to reach 12–18 inches before spraying.
- Apply herbicide to the regrowth or directly to green leaves. Mix the herbicide according to the label, using a non-ionic surfactant if recommended. Spray the leaves thoroughly, but not to the point of runoff. Focus on the lower leaves and stems. For best results, spray on a dry, windless day with temperatures between 60–80°F. Avoid spraying before rain within 24 hours.
- Dig out small patches manually. For isolated clumps, use a sharp spade to dig out the entire root mass. Reeds have deep, tough rhizomes that can extend several feet. Dig at least 12 inches deep and remove all roots and rhizomes you can find. Shake off the soil and place the plant material in a heavy-duty bag or on a tarp to dry and dispose of it (do not compost, as rhizomes can regrow).
- Smother large areas with black plastic. For areas you want to clear without chemicals, cut the reeds down to ground level. Lay heavy black plastic over the entire patch, overlapping edges by at least 12 inches, and weigh down the edges with soil, rocks, or staples. Leave the plastic in place for at least one full growing season (6–12 months). The lack of light and heat will kill the roots.
- Repeat treatments as needed. Reeds are persistent. Even after herbicide or smothering, expect regrowth from surviving rhizomes. Monitor the area monthly and spot-treat new shoots. It often takes 2–3 seasons of consistent effort to fully eradicate a patch.
- Restore the field. Once the reeds are dead, remove the dead material to reduce fire risk and allow sunlight to reach the soil. Plant native grasses, clover, or other desired vegetation to compete with any remaining reed seeds and prevent erosion.
Common Mistakes
- Mowing too early in the season. Cutting reeds in spring or early summer encourages vigorous regrowth and can spread rhizome fragments. Mowing alone rarely kills reeds; it only weakens them if done repeatedly over several years.
- Using non-aquatic herbicide near water. Standard glyphosate formulations are not approved for wetland use and can harm fish and amphibians. Always check the label for aquatic approval.
- Digging and leaving roots on the soil surface. Reed rhizomes can survive for weeks if left in contact with moist soil. Bag them or dry them on a tarp in the sun for several days before disposal.
- Spraying on a windy day. Drift can kill desirable plants and reduce the effectiveness of the treatment on the reeds.
- Stopping after one treatment. Reeds are perennial and will regrow from any missed root. Consistency is key.
Tips
- Combine methods for best results. For example, mow in early summer, then spray the regrowth in late summer. This stresses the plant and maximizes herbicide uptake.
- Use a wiper applicator for tall reeds. If you want to avoid spraying, you can use a rope-wick applicator to wipe herbicide onto the leaves of taller reeds without hitting lower-growing plants.
- Time your digging after rain. Soft, moist soil makes it easier to pull up the entire root system.
- Monitor the field for at least two years. Keep a log of treatments and regrowth locations to stay on top of new shoots.
- Consider grazing animals. Goats and cattle can graze young reed shoots, but they will not eliminate the roots. Use grazing as a maintenance tool, not a primary control.
Troubleshooting
- Reeds regrow after herbicide. This is normal. Either you sprayed too early (before the plant moved sugars down), or the herbicide did not reach the roots. Wait until late summer, mow, and spray the regrowth. If regrowth persists, consider a second application in early fall.
- Herbicide seems ineffective. Check that you used the correct concentration and added a surfactant. Also, ensure the reeds are actively growing and not drought-stressed. Water them a week before spraying if the soil is dry.
- Plastic sheeting blows away or tears. Use heavier plastic (6 mil) and secure edges with soil-filled bags or metal landscape pins every few feet. If tears occur, patch them with duct tape or overlap new plastic.
- Digging is too hard in dry soil. Water the area thoroughly a day before digging, or wait for rain. Use a pickaxe or mattock to break up compacted soil.
- Reeds return from seeds. Common reed produces thousands of seeds that can remain viable for years. After removing mature plants, monitor for seedlings and pull them by hand or spot-spray them when young.
Frequently Asked Questions
- Will burning get rid of reeds? Burning removes dead foliage but does not kill the underground rhizomes. In fact, it can stimulate new growth. Only use burning as a follow-up to remove dead debris after other control methods have killed the roots.
- Is it safe to use Roundup near a pond? Only if you use a formulation specifically labeled for aquatic use (e.g., Roundup PondEdge or Rodeo). Standard Roundup contains surfactants that are toxic to aquatic life. Always read the label.
- How long does it take to kill reeds? With herbicide applied in late summer, you may see top growth die within 2–3 weeks, but the roots may take several months to fully die. Complete eradication usually takes 1–3 growing seasons.
- Can I till the reeds under? Tilling can spread rhizome fragments and make the problem worse. It is only recommended if you are converting the field to annual crops and can follow up with repeated tillage and herbicide for a full season.
- Do reeds have any beneficial uses? Yes, reeds are used for thatching, building material, and erosion control in some contexts. However, in a field where you want other vegetation, they are invasive and should be managed.
- What should I plant after removing reeds? Choose native grasses or forbs suited to your soil and moisture. Planting a dense cover crop like ryegrass or clover can help outcompete reed seedlings and stabilize the soil.
Related
- Quality Craftsmanship Remodeling Inc: What to Know
- Smokin Mirror Salon: What It Is & How It Works
- Crayon Hearts Suncatchers: How to Make Them
How pages are sourced and corrected: Sources and editorial policy.