OneStopList

Gods and goddesses

Hitachi Cordless Brushless Finish Nailers: Full Guide

Updated November 17, 2026

Yes, Hitachi cordless brushless finish nailers—now sold under the Metabo HPT brand—are reliable, professional-grade tools that combine the convenience of battery power with the driving force of a pneumatic nailer. The current 18V models (like the 18V Brushless 16GA Straight Finish Nailer, NT1865DMB) are the direct successors to Hitachi’s legendary pneumatic finish nailers, and they deliver comparable performance without the need for an air compressor or hose.

Background: From Hitachi to Metabo HPT

Hitachi Power Tools changed its name to Metabo HPT in North America in 2018, after Hitachi sold its power tool division to the KKR investment group. The brand is still called HiKOKI in many international markets. This is important because many users search for “Hitachi” when shopping for tools that are now labeled Metabo HPT. The cordless brushless finish nailers you see today under the Metabo HPT name are the direct descendants of Hitachi’s pneumatic nailers, which were famous for their durability and consistent driving power.

The transition to cordless began around 2015 with the introduction of the 18V MultiVolt platform, and the brushless finish nailers arrived a few years later. The brushless motor is a key upgrade: it generates more torque, runs cooler, and lasts longer than the older brushed motors, and it allows the tool to drive nails into dense hardwoods that earlier cordless models struggled with.

How a Cordless Brushless Finish Nailer Works

Instead of compressed air, a cordless finish nailer uses a battery to power a brushless motor that drives a flywheel or a mechanical linkage to compress a spring, which then strikes the nail. In the Metabo HPT system, the motor spins a flywheel to build up kinetic energy, and when you press the trigger, that energy is transferred to the driver blade, which pushes the nail into the wood. This design is called a “flywheel” system, and it is the same basic principle used by other major brands like DeWalt and Milwaukee.

The brushless motor is controlled by a circuit board that adjusts the speed and torque based on the material and the nail length. This allows the tool to drive nails consistently, even in hardwoods like oak or maple, without needing to adjust an air pressure dial. The tool also has a depth adjustment wheel near the nose, so you can set how deep the nail sits in the wood.

Choosing the Right Model

When choosing a Hitachi/Metabo HPT cordless brushless finish nailer, you need to consider three main factors: nail gauge, nail length, and battery platform.

  • Nail gauge: Finish nailers typically use 15-gauge or 16-gauge nails. The 16-gauge is more common for general trim work and leaves a smaller hole, while the 15-gauge is thicker and holds better for heavier moldings and door casings.
  • Nail length: Most models drive nails from 1-1/4 inch up to 2-1/2 inches. Check the specs to ensure the tool handles the lengths you need for your projects.
  • Battery platform: Metabo HPT uses the 18V MultiVolt battery system, which is compatible with all their 18V tools. If you already own other Metabo HPT or HiKOKI tools, you can share batteries. If you are starting fresh, consider the cost of batteries and chargers.

For example, the NT1865DMB is a 16-gauge straight finish nailer that drives nails from 1-1/4 to 2-1/2 inches. It is a popular choice for baseboards, crown molding, and window casings. If you need a 15-gauge angled nailer, the NT1850DMB is the equivalent model, but it drives angled nails and is better for tighter spaces.

Common Problems and Misconceptions

One common misconception is that cordless finish nailers are not powerful enough to drive nails into hardwood. While older cordless models did struggle, the brushless versions have largely solved this problem. The Metabo HPT brushless finish nailer can drive a 2-1/2 inch nail into kiln-dried oak without issue, according to user reviews and independent tests. However, you may need to adjust the depth setting and use a slower, steady push rather than a quick tap.

Another issue is battery drain. Driving nails is a high-torque operation, and the motor draws a lot of current. A 3.0Ah battery will typically drive about 1,000 to 1,200 nails on a full charge, but this varies with nail length and wood hardness. If you are doing a large framing or trim job, you may need two or three batteries to avoid downtime.

Jamming is another common problem. Like any nailer, cordless models can jam if you use bent or damaged nails, or if you drive into a knot in the wood. The Metabo HPT has a tool-free jam release mechanism that lets you open the nose and clear the jam quickly, but it is still a hassle. Using high-quality nails and keeping the magazine clean will reduce jams.

Comparison with Pneumatic and Other Cordless Brands

Compared to pneumatic finish nailers, the cordless brushless version offers obvious benefits: no compressor, no hose, no noise, and no maintenance of the air system. The trade-off is weight and cost. A cordless finish nailer weighs around 7 to 8 pounds with a battery, while a pneumatic nailer weighs about 3 to 4 pounds. The cordless tool is more tiring to use for overhead work, but for most trim jobs the convenience outweighs the extra weight.

When compared to other cordless brands, the Metabo HPT is generally praised for its excellent balance and low recoil. The flywheel system produces less vibration than the mechanical linkage systems used by some competitors. However, the battery platform is less common than DeWalt or Milwaukee, so if you are already invested in another brand, that may be a deciding factor.

Cost and Value

The price of a Hitachi/Metabo HPT cordless brushless finish nailer typically ranges from $200 to $300 for the bare tool, and $300 to $400 for a kit with a battery and charger. This is more expensive than a pneumatic nailer, which can be had for under $150, but you save the cost of a compressor and hose if you don’t already own them. The long-term value is good because the brushless motor and robust construction are designed for professional use, and the tool holds its resale value reasonably well.

Batteries are a significant additional cost. A 3.0Ah MultiVolt battery costs about $100, and a 6.0Ah battery costs around $150. If you are starting from scratch, a kit with two batteries is a better deal than buying the bare tool and batteries separately.

Safety and Maintenance

Safety is critical with any nailer. Always wear safety glasses, and never point the tool at anyone. The trigger on these nailers has a contact safety tip that must be pressed against the work surface before the tool will fire. This prevents accidental discharge, but it also means you need to press the nose firmly against the wood before pulling the trigger. Some models have a switch to change between sequential and bump firing modes—sequential requires a fresh trigger pull for each nail, while bump allows you to hold the trigger and bounce the nose along the wood. For finish work, sequential is safer and more precise.

Maintenance is minimal but important. Keep the magazine and nose clean, and occasionally oil the driver blade and moving parts with a light machine oil. Do not use grease or heavy oil, as it can attract dust and cause jams. Also, inspect the battery contacts and keep them clean to ensure a solid connection.

Alternatives to Consider

If you are not set on the Hitachi/Metabo HPT brand, there are other excellent cordless brushless finish nailers on the market. The DeWalt 18V XR 16GA finish nailer (DCN660D) is a direct competitor, with a similar flywheel design and a proven track record. The Milwaukee 18V cordless finish nailer (2744-20) is also popular, and it uses a different mechanical linkage system that some users find more reliable in cold weather. The Ryobi One+ 18V finish nailer is a more budget-friendly option, but it is not brushless and has less power, making it better for light-duty use.

If you already own a compressor, a pneumatic finish nailer is still the lightest and most powerful option, and it is far cheaper. But if you value portability and ease of use, a cordless brushless finish nailer is a worthwhile investment.

Frequently Asked Questions

Is the Hitachi cordless finish nailer the same as Metabo HPT?

Yes, in North America, Hitachi Power Tools rebranded to Metabo HPT in 2018. The tools are identical in design and function, just with a different name and logo. In other markets, the brand is called HiKOKI. So if you see a Metabo HPT finish nailer, it is the same tool that was formerly sold as Hitachi.

Can I use 16-gauge nails in a 15-gauge nailer?

No, you cannot. The gauge of the nail refers to the thickness of the wire. A 15-gauge nail is thicker than a 16-gauge nail, and the magazine and driver are designed specifically for one gauge. Using the wrong gauge can cause jams, misalignment, or damage to the tool. Always use the correct gauge and length of nails specified in the manual.

How many nails can I drive on a single battery charge?

With a 3.0Ah battery, you can typically drive around 1,000 to 1,200 nails, depending on the length of the nails and the hardness of the wood. Driving longer nails into hardwoods uses more power, so you may get fewer shots. A 6.0Ah battery will roughly double that number. It is a good idea to have at least two batteries on hand for long projects.

Why does my cordless finish nailer jam so often?

Jams are usually caused by using bent or damaged nails, or by driving into a knot or a hard spot in the wood. Also, if the magazine is not loaded correctly or the nails are not the right size, jams will occur. Make sure you are using high-quality, straight nails and keep the magazine clean. If the tool jams frequently, check the driver blade for wear or damage.

Do I need to oil my cordless finish nailer?

Yes, but only lightly. Unlike pneumatic nailers, which require oil in the air supply, cordless nailers only need a drop of oil on the driver blade and the moving parts in the nose occasionally. Use a light machine oil, and wipe off any excess to avoid attracting dust. Over-oiling can cause problems, so a little goes a long way.

Related

How pages are sourced and corrected: Sources and editorial policy.