The Festool HK55 and HKC55 are both cordless hand-held circular saws with a 55 mm cutting depth, but the HK55 is the older, heavier model with a brushless motor, while the HKC55 is the newer, lighter version with a brushless motor and a more compact design. Both saws share the same guide rail compatibility and cutting capacity, but they differ in weight, motor technology, and included accessories, which affects their suitability for different types of work.
Background: Why Festool Made Two 55 mm Saws
Festool introduced the HK55 as its first cordless circular saw, designed for on-site work where a mains-powered saw wasn’t practical. It was built to cut like a corded saw, with a powerful motor and a rigid base plate. However, at 4.3 kg (with battery), it was heavy for a hand-held saw, and users wanted a lighter option for overhead work and prolonged use.
The HKC55, released later, addressed that complaint. It uses a brushless motor, which is more efficient and lighter than the brushed motor in the HK55. The HKC55 weighs 3.7 kg with a 5.2 Ah battery, a noticeable reduction. Festool also redesigned the handle and added a quick-release for the blade, making it easier to change blades without tools. The HK55 has a tool-less blade change as well, but the HKC55’s system is more refined.
How the HK55 and HKC55 Work
Both saws are 18-volt cordless models that use Festool’s 18 V Li-ion batteries. They are compatible with the same guide rails (FS, FS-K, and FS/2), so if you already own a Festool track saw, you can use these hand-held saws on the same rails. The cutting depth is 55 mm at 90 degrees, which is enough for most framing lumber and sheet goods.
The key difference in operation is the motor. The HK55 has a brushed motor, which is simpler but less efficient and produces more heat. The HKC55’s brushless motor is electronically commutated, meaning it can adjust its power output based on the load, giving longer runtime and a longer motor life. The HKC55 also has a slightly higher no-load speed (5,500 rpm vs. 5,200 rpm), but both are more than adequate for clean cuts in softwood and hardwood.
Both saws have a dust extraction port that connects to a Festool vacuum, but the HKC55’s port is positioned differently to improve balance. The HKC55 also has a LED light to illuminate the cut line, which the HK55 lacks.
Key Differences: Weight, Motor, and Accessories
- Weight: HKC55 is about 0.6 kg lighter (3.7 kg vs. 4.3 kg with a 5.2 Ah battery).
- Motor: HKC55 uses a brushless motor; HK55 uses a brushed motor.
- Blade change: HKC55 has a faster, tool-less blade change with a single lever; HK55 requires turning a screw but still no tools.
- Included accessories: The HKC55 typically comes with a 48-tooth fine-cut blade, while the HK55 often includes a 28-tooth general-purpose blade. Check the specific kit contents.
- Price: The HKC55 is usually more expensive due to the newer motor and design.
How to Choose Between the HK55 and HKC55
Choose the HKC55 if you value lighter weight for overhead cuts or if you work long days and need the extra runtime from the brushless motor. It is also the better choice if you plan to use the saw frequently on guide rails, as the lighter weight makes rail work less tiring.
Choose the HK55 if you find a good deal on a used or discounted model, or if you prefer a simpler, more robust design with fewer electronic components. The HK55 is still a capable saw, but its weight is a real drawback for many users. If you are a professional who uses the saw all day, the HKC55 is worth the extra cost.
Consider the batteries you already own. Both saws use the same 18 V batteries, so if you have a Festool drill or impact driver, you can share batteries. The HKC55 is compatible with the newer 5.2 Ah and 8.0 Ah batteries, which give longer runtime, but the HK55 also works with those batteries, just with less efficiency.
Common Problems and Maintenance
Users report that the HK55’s weight can cause fatigue, and some have experienced the saw stalling under heavy load if the battery is low. The HKC55 has fewer such reports, but some users note that the dust extraction port can clog if you cut very dusty material without a vacuum attached.
Regular maintenance includes: cleaning the sawdust from the blade guard and the motor vents, checking the carbon brushes on the HK55 (since it is a brushed motor), and keeping the guide rail splinter guard in good condition. Both saws have a riving knife that must be adjusted when changing the cutting depth; if it is not set correctly, it can cause kickback.
One common misconception is that the HKC55’s brushless motor makes it more powerful. In practice, both saws have similar cutting performance; the brushless motor mainly improves efficiency and lifespan, not raw power.
Cost and Value
The HKC55 is priced higher than the HK55, usually by about 10-15% when new. The HK55 has been discontinued in many markets, so you may find it at a discount. However, the HKC55’s included accessories (like a better blade and a carrying case) can offset the price difference.
If you are buying new, the HKC55 is the better long-term investment because of the brushless motor and lighter weight. If you are on a tight budget and can find a used HK55 in good condition, it is still a solid saw, but factor in the cost of a new battery if the old one is worn.
Safety and Proper Use
Always wear eye and hearing protection when using either saw. Do not use the saw without the riving knife installed, as it prevents kickback. When cutting on a guide rail, ensure the rail is securely clamped to the workpiece. Never force the saw through the cut; let the blade do the work. If the saw stalls, release the trigger and remove the blade from the cut before restarting.
Use the correct blade for the material. For plywood and sheet goods, use a fine-tooth blade (like the 48-tooth included with the HKC55) to avoid tear-out. For framing lumber, a general-purpose blade with fewer teeth is faster. Always check that the blade is sharp; a dull blade can overheat and cause binding.
Alternatives to Consider
If you are not committed to Festool, the Makita DSSSZUZ is a comparable 18 V cordless circular saw with a similar cutting depth and a brushless motor, often at a lower price. The Bosch GKS 18V-68 GC has a larger cutting depth (68 mm) and a dust extraction system, but it is heavier. For a track saw experience, the Festool TSC 55 is the dedicated plunge-cut version of the HKC55, which is better for sheet goods but costs more.
If you already own a Festool track saw, the HKC55 or HK55 can serve as a secondary saw for quick cuts without setting up the track, but if you do not need a hand-held saw, the track saw alone may be sufficient.
Frequently Asked Questions
Can the HK55 and HKC55 use the same guide rails?
Yes, both saws are compatible with Festool’s FS guide rails, so you can use them on the same tracks.
Is the HKC55 worth the extra cost over the HK55?
For most users, yes, because of the lighter weight and brushless motor, which improve comfort and longevity. If you are a casual user, the HK55 might be sufficient if you find it at a discount.
What is the maximum cutting depth of these saws?
Both saws have a maximum cutting depth of 55 mm at 90 degrees, and about 48 mm at 45 degrees.
Can I use a corded Festool blade on the HK55/HKC55?
Yes, both saws use 160 mm blades with a 20 mm arbor, which is the same as many Festool corded saws. Always check the blade’s RPM rating to ensure it is safe for the saw’s speed.
Do these saws have a dust extraction port?
Yes, both have a 27 mm dust port that connects to a Festool vacuum or any compatible vacuum adapter.
Are the batteries interchangeable between the HK55 and HKC55?
Yes, both use Festool’s 18 V battery platform, so any Festool 18 V battery will work in either saw.
Related
- Travel to Osaka? What to Know Before You Go
- Apollo Beach Motors: Dealership Overview
- Travel Ultrasound Jobs: How They Work
How pages are sourced and corrected: Sources and editorial policy.