Yes, Festool added knockdown connectors for the Domino XL DF 700 joiner. Introduced as part of the Domino Connector System, these connectors allow you to create strong, detachable joints using the same 14mm or 18mm Domino tenons you already cut, eliminating the need for separate hardware or specialized routing.
Background: Why Festool Developed the Connector System
Festool’s Domino joiners have been a staple in professional woodworking since the DF 500 arrived in 2007. The system uses a specialized plunge router with a floating mortise bit to cut matching slots in two workpieces, into which you glue a beechwood or plywood tenon. The result is a joint that is faster to cut than traditional mortise-and-tenon joinery and nearly as strong.
However, one limitation remained: the joints were permanent. If you wanted to disassemble a piece of furniture for transport or access, you had to use screws, cam locks, or other visible hardware. The Domino Connector System, released in 2019 for the DF 500 and later expanded to the DF 700, solves this by integrating a metal connector into the Domino tenon itself. The system is designed for the 14mm and 18mm tenons used by the Domino XL, making it suitable for larger frames, tables, and heavy-duty cabinetry.
How the Domino XL Knockdown Connectors Work
The connector system consists of three main components: a special Domino tenon with a threaded metal insert, a connecting bolt, and a tightening mechanism. Here is how the system functions in practice:
- Tenon with insert: The connector tenon is a standard Domino XL tenon (14mm or 18mm) that has a metal threaded insert molded into one end. You cut the mortise exactly as you would for a regular tenon.
- Connecting bolt: A precision-machined bolt, available in different lengths, screws into the threaded insert of the tenon. The bolt protrudes from the edge of the workpiece.
- Tightening mechanism: The matching workpiece has a second mortise that accepts the bolt head. A small metal cam or a sliding lock (depending on the version) is inserted from the outside face, and when turned with a hex key or Torx driver, it pulls the bolt head tight, clamping the two pieces together.
This design allows you to create a joint that can be assembled and disassembled multiple times without losing clamping force. The connector is completely hidden when the joint is closed, and the only visible sign is a small hole for the tightening tool, which can be covered with a cap or left as a design feature.
Choosing Between the DF 500 and DF 700 Connector Kits
Festool offers separate connector kits for the Domino DF 500 (which uses 8mm, 10mm, and 12mm tenons) and the Domino XL DF 700 (which uses 14mm and 18mm tenons). For the DF 700, the system is available in two sizes:
- 14mm connectors: For lighter to medium-duty frames, such as table aprons, chairs, and shelving. The 14mm tenon is shorter, so the connector bolt is also shorter.
- 18mm connectors: For heavy-duty joints, such as bed frames, workbenches, and large tables. The 18mm tenon provides more glue surface and a larger bolt for higher clamping force.
When choosing, consider the thickness of your material. The 18mm system requires at least 28mm of stock thickness to fully embed the tenon and connector, while the 14mm system can work with stock as thin as 20mm. Always check the manufacturer’s specifications for minimum material thickness to avoid blowout.
Common Problems and Misconceptions
One common misconception is that the knockdown connector replaces the need for glue. That is not the case. The connector is designed for joints that you want to disassemble, but if you glue the tenon, you cannot take it apart. The system works best when you use the connector alone, without glue, for knock-down furniture. If you want a permanent joint, use a standard tenon with glue.
Another issue is the cost. The connector tenons are significantly more expensive than regular Domino tenons. A pack of 20 connector tenons costs roughly twice as much as a pack of standard tenons. Additionally, you need to buy the metal bolts and cams separately, which adds to the overall investment. For a one-off project, the cost may be prohibitive, but for a furniture maker who builds pieces that need to be flat-packed, the system pays for itself in saved time.
Some users have reported that the cam lock can strip if over-tightened. The system is designed to be tightened to a specific torque, and Festool provides a small torque guide with the kit. Using a standard drill driver without a clutch can easily over-torque the cam, so it is best to use a manual hex key or a drill set to a low torque setting.
Comparison with Traditional Knockdown Hardware
Before the Domino Connector System, woodworkers used a variety of methods for knock-down joints:
- Cam locks and dowels: The standard for flat-pack furniture. They are cheap and effective, but require precise drilling of multiple holes and are not as strong as a Domino joint.
- Threaded inserts and bolts: Strong and reliable, but the hardware is visible on the outside of the joint unless you counterbore and cap it.
- Bed bolts: Used for bed frames, these are strong but require a cross-dowel and are not suitable for all furniture types.
- Domino Connector System: Combines the strength of a floating tenon with the convenience of hidden hardware. The joint is stronger than a cam lock because the tenon provides shear strength, and the connector provides clamping force.
The main advantage of the Domino system is speed and alignment. Because the mortise is cut with the Domino machine, the alignment is perfect every time, and you do not need to measure and drill multiple holes. The downside is the initial cost of the Domino joiner itself, which is a significant investment for a hobbyist.
Cost and Where to Buy
As of 2024, the Domino XL Connector System is available through Festool dealers and online retailers. The pricing is as follows (approximate, in USD):
- Connector tenons (14mm, pack of 20): $45–$55
- Connector tenons (18mm, pack of 20): $55–$65
- Connector bolts (pack of 20): $20–$30
- Tightening cams (pack of 20): $25–$35
- Installation tool (optional): $40–$60
You can also buy a complete starter kit that includes tenons, bolts, cams, and a drilling template for around $150. The installation tool is not strictly necessary—you can use a standard hex key—but it makes the process faster and more accurate.
Safety and Best Practices
When using the Domino Connector System, follow these safety guidelines:
- Always wear eye protection when cutting mortises with the Domino XL.
- Use the correct bit for the tenon size. A 14mm connector requires a 14mm bit, and an 18mm connector requires an 18mm bit. Using the wrong bit will damage the connector or the workpiece.
- Do not exceed the maximum tightening torque. The cams are designed for a specific range; over-tightening can strip the threads or break the cam.
- For joints that will be disassembled and reassembled frequently, check the connector for wear. The threads on the insert can wear out after many cycles, so inspect them periodically.
- When cutting mortises near the edge of a board, clamp a sacrificial piece to prevent tear-out.
Frequently Asked Questions
Can I use the Domino XL connectors with the DF 500?
No. The DF 500 uses smaller tenons (8mm, 10mm, 12mm) and has a different connector system. The DF 500 connector kit is sold separately and is not interchangeable with the DF 700 kit.
Do I need to buy a special bit to cut the mortise for the connector?
No. The connector tenons are the same size as standard Domino XL tenons, so you use the same bit you already have for 14mm or 18mm tenons. The only special tool is the installation tool for the cam, which is optional.
Can I use the connector with glue if I want a permanent joint?
Technically yes, but there is no benefit. The connector is designed to be used without glue. If you glue it, you cannot disassemble the joint, and the metal connector becomes unnecessary. For a permanent joint, use a standard tenon with glue.
How much weight can a Domino XL connector hold?
Festool does not publish a specific weight rating, but the 18mm connector is used in bed frames and heavy tables. In practice, the joint strength is comparable to a glued 18mm Domino joint, which is very strong. The connector adds clamping force but does not add shear strength beyond the tenon itself.
Is the connector system worth the cost for a hobbyist?
If you build furniture that needs to be disassembled for moving or storage, the system is a time-saver. However, for a one-off project, traditional hardware like cam locks or threaded inserts may be more cost-effective. The Domino connector shines when you build multiple pieces with the same joinery.
Related
- Landing Fountain City: Meaning & Origins
- Grim Dawn Manticore Eye: Uses & Farming
- Athens Temple City? The Real Story
How pages are sourced and corrected: Sources and editorial policy.