OneStopList

Gods and goddesses

Ernie Conover Woodturning: Legacy & Impact

Updated November 18, 2026

Ernie Conover is a celebrated American woodturner, author, and educator whose decades of work helped shape modern woodturning through his teaching, writing, and tool design. His legacy is built on making complex turning techniques accessible to hobbyists and professionals alike, and his influence persists in the many books, videos, and tools that bear his name.

Early Life and Path to Woodturning

Ernie Conover grew up in Ohio, where he was exposed to woodworking through his father, a patternmaker. This early familiarity with wood and machinery laid the groundwork for his future career. After serving in the U.S. Navy, Conover worked as a high school industrial arts teacher, a role that honed his ability to explain technical processes clearly. He later founded Conover Woodcraft, a company that produced woodworking tools and kits, and eventually turned his focus entirely to woodturning—a craft he had practiced since his teens.

His transition from general woodworking to specialized turning was gradual, but by the 1980s he was a prominent figure in the American woodturning community. He became a regular contributor to Fine Woodworking magazine and other publications, where his practical, no-nonsense approach to turning resonated with readers. His articles often focused on tool technique, lathe setup, and project design, filling a gap for home woodturners who lacked access to formal training.

Teaching and the Conover Style

Conover is perhaps best known for his teaching. He conducted workshops across the United States and internationally, often at his own school in Ohio, where he taught thousands of students over several decades. His teaching style was direct and encouraging, emphasizing safety and fundamental skills before moving to advanced techniques. He was particularly known for his work on spindle turning, bowl turning, and the proper use of gouges and scrapers.

His instructional videos, produced in the 1990s and 2000s, became standard resources for woodturning clubs and individual learners. Titles like Turning Wood and Bowl Turning were widely distributed and remain referenced today for their clarity. Conover’s ability to break down a cut into its component motions—approach angle, tool rest height, and body position—helped countless turners overcome common frustrations.

Contributions to Tool Design

Beyond teaching, Conover made practical contributions to tool design. He was an early advocate for the use of high-speed steel (HSS) in turning tools, which allowed for longer-lasting edges compared to carbon steel. He also worked with manufacturers to develop ergonomic handles and improved tool geometries. His name appears on a line of turning tools, including bowl gouges and scrapers, that are still sold today. While he did not invent the modern bowl gouge, his recommendations on flute shapes and handle design influenced later products.

He also wrote extensively on lathe selection and safety, urging turners to choose machines with adequate horsepower and variable speed. His guidance on sharpening—using a slow-speed grinder with a light touch—became a standard protocol in many workshops.

Books and Written Legacy

Conover authored several books, including Turning Wood (1991) and The Woodturner’s Workbook (1992). These books were part of the Taunton Press “Fine Woodworking” series and were praised for their step-by-step photographs and clear instructions. Turning Wood covered everything from basic cuts to advanced projects like hollow forms and segmented turning. His writing style mirrored his teaching: straightforward, patient, and focused on results.

In addition to books, he wrote numerous magazine articles and columns. His “Questions & Answers” columns in Fine Woodworking addressed common problems such as tear-out, chatter, and tool catches. These columns built a reputation for Conover as a problem-solver who understood the beginner’s perspective.

Influence on the Craft Community

Conover’s impact extends beyond his direct students. He was a founding member of the American Association of Woodturners (AAW) and served on its board for several years. He regularly demonstrated at AAW symposia and regional events, introducing new techniques to large audiences. His efforts helped standardize teaching methods and safety practices across the organization.

He also mentored many younger turners, some of whom became professional turners and teachers themselves. His emphasis on “practice with purpose”—repeating a cut until it becomes muscle memory—influenced how turning is taught in many clubs today. While he did not invent any specific technique, his systematic approach to skill development was a departure from the trial-and-error methods common in earlier decades.

Common Misconceptions and Clarifications

A common misconception is that Ernie Conover invented the modern lathe or the bowl gouge. In reality, he was an adopter and popularizer, not an inventor. The bowl gouge existed before him, but his writings helped standardize its use. Similarly, he did not create the first woodturning video, but his videos set a new standard for instructional clarity. Another misconception is that Conover only worked with spindle turning; in fact, his books and videos cover a wide range, including faceplate work and hollow turning.

His name is sometimes confused with that of his contemporary, Richard Raffan, another influential turner. While both emphasized clean cuts and efficiency, Conover’s teaching was more structured and classroom-oriented, while Raffan’s was more improvisational. Both contributed greatly, but they had distinct styles.

Frequently Asked Questions

Is Ernie Conover still alive?

As of this writing, Ernie Conover is alive and in his 80s. He retired from active teaching but remains a respected elder statesman in the woodturning community. He occasionally appears at events and has been honored by the AAW for his lifetime contributions.

What is the best Ernie Conover book for a beginner?

Most turners recommend Turning Wood as the best starting point. It covers tool selection, sharpening, basic cuts, and simple projects. The book’s layout is logical, and the photographs are clear, making it ideal for self-study.

Did Ernie Conover invent the bowl gouge?

No. The bowl gouge predates Conover. However, he was influential in popularizing its use and in recommending specific grinds and handle lengths. His writings helped many turners choose and use bowl gouges effectively.

What is Conover’s sharpening method?

Conover recommended a slow-speed grinder (around 1,725 RPM) with a light touch, using a wheel around 8 inches in diameter. He advised against heavy pressure, which can overheat the tool and ruin the temper. He also suggested using a jig for consistent bevel angles, though he taught freehand sharpening as a skill to develop.

Are Conover’s videos still available?

Yes, many of his videos are available on DVD and some have been digitized for streaming platforms. They are also often available through public libraries and woodturning clubs. They remain a valuable resource for visual learners.

Conclusion

Ernie Conover’s legacy is one of education and accessibility. He took a craft that was often guarded by apprenticeships and opened it to anyone with a lathe and a desire to learn. Through his books, videos, and personal teaching, he helped build the modern woodturning community. While he may not have invented the tools or techniques, his role as a teacher and communicator was indispensable. For anyone interested in woodturning, studying Conover’s work is a solid foundation.

Related

How pages are sourced and corrected: Sources and editorial policy.