OneStopList

Gods and goddesses

Bora Workbench Caster Kit: What to Know

Updated November 18, 2026

The Bora workbench caster kit is a mobile base accessory designed to fit Bora’s Centipede workstations and other compatible Bora products, letting you roll a stationary bench around a shop. It typically includes four locking casters and mounting hardware that attach to the workbench’s legs, converting a fixed setup into a portable one.

Background: Why Bora Made a Caster Kit

Bora is known for the Centipede, a collapsible aluminum workstand that folds flat but holds up to 1,000 pounds. The original Centipede was meant to be carried, but many woodworkers wanted to leave it set up and simply roll it aside when not in use. The caster kit fills that gap by adding wheels without sacrificing the bench’s stability. It also works with other Bora products that share the same leg design, such as the Bora Portamate-style workbenches and the Bora Centipede with the optional solid top.

How the Kit Works

The kit replaces the standard rubber feet on the workbench legs with caster assemblies. Each caster has a stem or bracket that slides into the leg’s existing mounting hole, and a locking mechanism on the wheel keeps the bench stationary when engaged. Installation takes a few minutes with basic tools—usually a wrench or Allen key—and requires no permanent modification to the bench. The casters are typically 3-inch swivel casters with a brake on each one, so you can lock all four wheels to prevent rolling during use.

Choosing the Right Kit for Your Bench

Before buying, check the leg diameter and mounting style of your specific Bora workbench. The Centipede uses square or round legs depending on the model, and the caster kit is designed to match a particular leg size. Bora lists compatibility on the product page, but if you have an older or non-standard bench, measure the leg’s outer width and the distance between mounting holes. Some third-party universal caster kits also fit, but they may require drilling or adapter plates, which voids the bench’s warranty.

Common Problems and Solutions

  • Wheels don’t swivel smoothly: Debris or sawdust can jam the swivel bearing. Clean the casters with compressed air and apply a dry lubricant like silicone spray.
  • Brakes won’t hold: The locking tab may be misaligned. Check that the caster is fully seated in the leg and that the brake lever clicks into place. If not, tighten the mounting bolt.
  • Bench wobbles after installation: Ensure all four casters are the same height and the bench is on level ground. Some kits include shims to adjust for uneven floors.
  • Legs slip out of the caster bracket: This usually happens if the bench is lifted while the casters are locked. Always unlock the brakes before moving the bench.

Cost and Value Compared to Alternatives

The Bora caster kit typically retails for around $50 to $70, depending on the retailer and whether it’s the standard or heavy-duty version. That’s comparable to other workbench caster kits, but the Bora kit is specifically engineered for their leg geometry, so it fits without adapters. A cheaper alternative is to buy four universal casters with stem adapters for about $20, but you’ll likely need to drill holes or use hose clamps, which can weaken the bench. A more expensive option is a mobile base with a foot pedal, like those from Shop Fox or HTC, which runs $80 to $150 and requires a separate mounting frame. For most users, the Bora kit is the simplest and most reliable choice.

Safety and Usage Tips

  • Always engage all four brakes before working on the bench, especially when cutting or planing.
  • Do not exceed the workbench’s rated load capacity when the casters are locked—check the bench’s label for the limit.
  • When rolling the bench, push from the center of the top, not the edge, to avoid tipping.
  • On uneven floors, use a leveling shim under one caster to prevent rocking.
  • Inspect the casters periodically for loose bolts or worn wheels, and replace them if they crack.

Frequently Asked Questions

Will the Bora caster kit fit my Centipede?

Most Bora Centipede models use the same leg diameter, but check the product description for compatibility. The kit is designed for the Centipede and the Bora Workbench with the same leg profile. If you have a different model, measure the leg’s outer width and compare it to the kit’s specifications.

Can I leave the casters on all the time?

Yes, the casters are designed to stay attached. The brakes lock the wheels, so the bench remains stable during use. Just make sure to unlock them before moving the bench to avoid stressing the mounting brackets.

Do the casters add height to the bench?

Yes, the casters add about 3 to 4 inches to the overall height, depending on the wheel size. If you need a specific work surface height, you may need to adjust the bench’s legs or use a platform.

Are the casters strong enough for heavy loads?

The kit’s casters are rated for a total load of around 1,000 pounds, matching the Centipede’s capacity. However, that rating assumes the load is evenly distributed and the brakes are engaged. Avoid putting all the weight on one corner.

Can I use the kit on a non-Bora workbench?

Technically, you could adapt it, but the mounting brackets are designed for Bora’s leg shape. Using them on a different bench may require drilling or welding, which is not recommended. Consider a universal caster kit instead.

Alternatives to the Bora Caster Kit

If you don’t want to spend the money or need a different solution, there are a few alternatives. One is to build a simple dolly with plywood and four casters, setting the bench on top when you need to move it. Another is to buy a mobile tool stand with a built-in base, like the Bora Portamate or the DeWalt Planer Stand, which come with wheels already attached. For a permanent solution, you could install a retractable caster system like the Rockler Bench Caster Kit, which uses a lever to raise and lower the bench onto wheels. Each has trade-offs in cost, stability, and ease of use.

Related

How pages are sourced and corrected: Sources and editorial policy.