OneStopList

Gods and goddesses

Jet Drum Sanders & Band Saws: What You Need to Know

Updated November 18, 2026

Jet does not produce a dedicated drum sander or band saw as of the current product line; the company focuses on woodworking machinery such as table saws, jointers, planers, and dust collectors. However, Jet does offer a range of band saws, including the popular JWBS series, and they manufacture drum sanders under the Jet brand, such as the JDS-12 and JDS-22 models. This article clarifies Jet’s actual offerings, compares them to alternatives, and provides practical guidance for choosing and using these tools.

Jet’s Woodworking Lineup: What They Actually Make

Jet is a well-known name in woodworking, part of the JPW Industries group. Their catalog includes metalworking and woodworking equipment, but when it comes to sanding and sawing, they have a focused selection:

  • Drum Sanders: Jet offers the JDS-12 (12-inch) and JDS-22 (22-inch) open-end drum sanders. These are stationary machines designed for thickness sanding and finishing flat stock.
  • Band Saws: Jet produces several band saws, including the 14-inch JWBS-14, the 18-inch JWBS-18, and the 20-inch JWBS-20. They also have a compact 10-inch model for hobbyists.

Notably, Jet does not make a combination sander/saw machine, and they do not produce a wide-belt sander for industrial use. Their drum sanders are aimed at small shops and serious hobbyists, not production lines.

How Jet Drum Sanders Work

A drum sander uses a rotating abrasive cylinder to remove material from the surface of a board. The workpiece is fed through the machine on a conveyor belt, and the drum height is adjusted to control the depth of cut. Jet’s models feature a few key design points:

  • Open-end design: Allows sanding panels wider than the drum itself by flipping the board.
  • Variable speed conveyor: You can adjust feed rate to match the material and grit.
  • Dust collection port: Essential for capturing the fine dust these machines produce.

Unlike a planer, which uses blades to cut, a drum sander uses abrasive to smooth and can handle glued-up panels, end grain, and even thin veneers without tear-out.

How Jet Band Saws Work

A band saw uses a continuous loop of toothed metal blade that runs between two wheels. The blade moves vertically through a table, allowing you to cut curves, resaw lumber, and make straight cuts. Jet’s band saws are typical of the genre:

  • Blade guides: Ball-bearing guides support the blade above and below the table, reducing friction and keeping the cut straight.
  • Tension adjustment: Proper blade tension is critical for straight cuts and blade life.
  • Fence and miter gauge: Included for straight cuts and angled cuts.

Jet’s larger models (18-inch and 20-inch) have more powerful motors and taller resaw capacity, making them suitable for cutting thick hardwoods.

Choosing Between a Drum Sander and a Band Saw

These tools serve completely different purposes. A drum sander is for finishing and dimensioning thickness; a band saw is for cutting shapes and resawing. You might need both, but if you’re choosing one, consider your primary tasks:

  • If you frequently build panels, need to sand to exact thickness, or work with fragile veneers, a drum sander is more useful.
  • If you cut curves, make furniture parts, or resaw boards into thinner pieces, a band saw is essential.
  • If you do both, you’ll eventually want both machines.

For a small shop, a 14-inch band saw and a 12-inch drum sander are common entry points. Jet’s JDS-12 is a popular choice for its price and performance.

Common Problems and Maintenance

Both machines have typical issues you can address yourself:

  • Drum sander snipe: This is a slight dip at the beginning or end of a board. Minimize it by supporting the workpiece and using a slower feed rate.
  • Conveyor belt tracking: If the belt drifts, adjust the tracking knob while the machine is running.
  • Band saw blade drift: This happens when the blade cuts at an angle. Adjust the fence to match the blade’s natural drift, or check blade tension and guide alignment.
  • Blade breakage: Often caused by excessive tension or dull blades. Always use a sharp blade and follow the manufacturer’s tension recommendations.

Regular cleaning of dust buildup and occasional lubrication of moving parts will extend the life of both tools.

Cost and Value Compared to Alternatives

Jet’s drum sanders and band saws are priced in the mid-to-upper range for hobbyist and prosumer equipment. As of 2025, the JDS-12 retails around $1,200, and the JDS-22 around $2,000. Band saws range from about $700 for the 10-inch to over $2,500 for the 20-inch model.

Compared to brands like Grizzly, Jet is generally more expensive but often has better fit and finish, and more reliable customer support. Compared to high-end European brands like Laguna or Felder, Jet is more affordable and easier to service. For a home shop, Jet offers a good balance of quality and cost.

Safety Considerations

Both machines have inherent risks. Always follow these safety practices:

  • Wear safety glasses and hearing protection.
  • Use push sticks or featherboards for narrow or short pieces.
  • Never wear loose clothing or gloves near rotating parts.
  • Keep the work area clean and well-lit.
  • For drum sanders, never sand pieces thinner than 1/8 inch without a backer board.
  • For band saws, keep your hands at least 3 inches from the blade and use a push stick for small pieces.

Also, ensure the dust collection system is running to prevent airborne particles.

Alternatives to Jet Machines

If Jet doesn’t have what you need, consider these alternatives:

  • Drum Sanders: Supermax (now owned by Jet) makes similar models, and Performax (also part of the same group) offers budget options.
  • Band Saws: Grizzly, Laguna, Rikon, and Powermatic offer comparable or better machines in various price ranges.
  • Combination Machines: Some brands like Shop Fox make combination sander/planers, but they are not drum sanders.

If you need a wide-belt sander for production, you’d look at industrial brands like Timesavers, not Jet.

Frequently Asked Questions

Does Jet make a 22-inch drum sander?

Yes, Jet offers the JDS-22, which is a 22-inch open-end drum sander. It’s a popular model for cabinet shops and serious hobbyists who need to sand wide panels.

Can I use a drum sander to sharpen a band saw blade?

No, drum sanders are not designed for sharpening blades. They are for sanding wood. For sharpening band saw blades, you’d use a dedicated blade sharpener or replace the blade.

What is the difference between a drum sander and a thickness planer?

A planer uses blades to cut wood to a specific thickness, leaving a smooth but slightly rough surface. A drum sander uses abrasive to remove material, which can also correct thickness but leaves a finer finish and can handle glued-up panels without tear-out.

Are Jet band saws made in the USA?

Jet tools are manufactured in various countries, including China and Taiwan. The company is headquartered in the United States, but they do not publicly disclose the exact factory for each model. You can check the manual or the product label for country of origin.

What is the best grit to use on a drum sander?

For general sanding, start with 80-grit for aggressive removal, then move to 120-grit for smoothing, and finish with 180-grit for a fine surface. Always use a fresh belt and avoid sanding too aggressively to prevent burning.

Can I resaw on a Jet band saw?

Yes, Jet band saws are capable of resawing, but the resaw capacity depends on the model. The 14-inch model can handle about 6 inches, while the 20-inch model can handle up to 12 inches. Use a wide, sharp blade (e.g., 1/2-inch or 3/4-inch) for best results.

Related

How pages are sourced and corrected: Sources and editorial policy.