The Infinity Mega Dado is a stackable dado set, not a planer bit, designed for use in a table saw or radial arm saw to cut wide, flat-bottomed grooves (dados) across or with the grain of wood. It is a popular choice among woodworkers because it produces clean, precise cuts with minimal tear-out, and its unique “Mega Dado” design includes features like a 6-inch diameter and a 1/2-inch arbor that improve cutting efficiency and chip removal.
What Is the Infinity Mega Dado?
The Infinity Mega Dado is a stacked dado blade set, meaning it consists of two outer blades and multiple inner chipper blades that you can combine to achieve a specific groove width. Unlike a wobble dado (which tilts to vary width) or a single blade, a stacked set gives you consistent, flat-bottomed cuts because all blades share the same cutting plane. The “Mega” in the name refers to its larger 6-inch diameter—most standard dado sets are 8 inches—and its aggressive 1/2-inch arbor hole, which allows for a thicker, more stable blade body. This design reduces vibration and deflection, especially when cutting hardwoods or deep grooves.
How the Mega Dado Works
To use the Mega Dado, you mount it on a table saw or radial arm saw arbor, just like a standard dado set. The two outer blades are 24-tooth carbide-tipped, and the inner chippers come in various thicknesses (typically 1/8, 1/4, and 1/2 inch) with a “flat-top grind” (FTG) on the teeth. The FTG grind is crucial because it produces a flat-bottomed groove, whereas a standard alternate top bevel (ATB) grind leaves a V-shaped bottom. You stack the chippers between the outer blades to reach the desired width—for example, a 3/4-inch dado requires a combination of chippers that total 3/4 inch. The set includes shims (thin washers) to fine-tune the width to within thousandths of an inch.
Choosing the Right Dado Set
When deciding if the Infinity Mega Dado is right for you, consider the following factors:
- Arbor size: The Mega Dado fits a 1/2-inch arbor, which is standard on most cabinet and contractor table saws. If your saw has a 5/8-inch arbor, you’ll need a different set or a bushing (though Infinity does not recommend bushings for safety).
- Cutting capacity: The 6-inch diameter gives a maximum depth of cut of about 1-1/8 inches, which is deeper than many 8-inch sets (which max out around 3/4 inch). This is useful for cutting deep grooves in thick stock or for box joints.
- Material: The Mega Dado is designed for solid wood and plywood. It works well on hardwoods like oak and maple, but for plywood, you may need to score the surface or use a zero-clearance insert to avoid chip-out on the top veneer.
- Cost: The Mega Dado typically retails for around $200–$250, which is mid-range compared to Freud (about $150) and Forrest (over $300). It’s a good value for the quality, but if you only cut occasional dados, a cheaper set may suffice.
Common Problems and Solutions
Woodworkers often report a few issues with the Mega Dado, but most have simple fixes:
- Tear-out on plywood: To minimize chipping, use a zero-clearance throat plate and make two passes—first a shallow scoring cut, then a full-depth cut. Alternatively, apply painter’s tape over the cut line.
- Burn marks: Burn marks occur when the feed rate is too slow or the blades are dull. Feed the wood steadily and firmly, and ensure the blades are sharp. If burning persists, check that the arbor nut is tight and the blades are parallel.
- Width adjustment: Getting an exact width can be tricky because chippers come in fixed sizes. Use the included shims to add 0.001-inch increments. Always test on scrap wood before cutting your workpiece.
- Noise and vibration: Some users find the 6-inch set noisier than 8-inch sets because it spins faster at the same RPM. Use a saw with a lower RPM (below 4,000) if possible, and always use a splitter or riving knife to prevent kickback.
Comparing to Other Dado Sets
How does the Mega Dado stack up against competitors? The Freud SD508 is an 8-inch set with similar features, but it has a 5/8-inch arbor and a shallower max depth (about 3/4 inch). The Forrest Dado King is a premium 8-inch set known for its extremely smooth cuts, but it costs nearly double the Mega Dado. The CMT 8-inch set is another mid-range option, but it often requires more shimming to get exact widths. The Mega Dado’s main advantage is its depth capability and stability at high feed rates, making it a favorite for joinery like box joints and finger joints. However, if you have a saw with a 5/8-inch arbor, you cannot use the Mega Dado without modification, so check your saw’s specs first.
Safety and Best Practices
Using any dado set requires strict safety precautions:
- Always use a riving knife or splitter: Dado cuts remove a lot of material, increasing the risk of kickback. A riving knife helps prevent the workpiece from being thrown back.
- Use a zero-clearance insert: A standard throat plate leaves a gap that can catch small offcuts. A zero-clearance insert supports the wood right up to the blade, reducing tear-out and preventing pieces from falling into the blade.
- Feed direction: Always feed against the rotation of the blade. For dado cuts, this means pushing the wood from front to back, with the flat side of the cut facing down.
- Never remove the guard: Many woodworkers remove the blade guard to see the cut, but this is extremely dangerous. Use a featherboard and push sticks to keep hands away from the blade.
- Check arbor nut tightness: The vibration of a dado set can loosen the arbor nut. Tighten it with a wrench, and re-check after a few cuts.
- Wear eye and hearing protection: Dado cuts produce fine dust and high noise levels. Use a dust collector and safety glasses.
Alternatives to the Mega Dado
If the Mega Dado doesn’t suit your needs, consider these alternatives:
- Wobble dado: A single blade that tilts to cut a variable-width groove. It’s cheaper and fits any arbor, but it leaves a curved bottom and is less precise.
- Router with a straight bit: For small dados, a router can be easier to control and leaves a perfectly flat bottom. However, it’s slower for long cuts and requires a guide.
- Other stacked sets: Brands like Freud, CMT, and Amana offer 8-inch sets that are more versatile for saws with 5/8-inch arbors. They may not cut as deep, but they are often quieter.
- Box joint jig: If you only need box joints, a dedicated box joint jig with a regular blade can be more accurate than a dado set.
Frequently Asked Questions
Can I use the Infinity Mega Dado on a 5/8-inch arbor?
No, the Mega Dado is designed for a 1/2-inch arbor only. Using a bushing to adapt it to a 5/8-inch arbor is not recommended because it can cause vibration and imbalance. If your saw has a 5/8-inch arbor, look for a dado set that specifically fits that size, such as the Freud SD508.
What is the maximum width of cut for the Mega Dado?
The Mega Dado can cut up to 13/16 inch wide, which is achieved by using all the chippers and shims. The set includes chippers that total 3/4 inch, plus shims for fine adjustment to 13/16 inch. For wider cuts, you would need a different set or make multiple passes.
Does the Mega Dado work on plywood without tear-out?
It can, but you need to take precautions. Use a zero-clearance insert, score the surface with a utility knife along the cut line, and feed slowly. Even then, you may see minor chip-out on the top veneer. For perfect results, many woodworkers use a router with a spiral bit for plywood dados.
How do I sharpen the Mega Dado blades?
Infinity recommends sending the blades to a professional sharpening service that specializes in carbide-tipped saw blades. You can sharpen them yourself with a diamond wheel, but it’s risky because the teeth must be ground to the same height and angle. Dull blades cause burning and poor cuts, so sharpen them when you notice a decline in performance.
Is the Mega Dado worth the price?
For serious woodworkers who cut dados frequently, yes. The quality of cut and depth capacity justify the cost. If you only cut a few dados a year, a cheaper set or a router might be more economical. Read reviews and compare to other sets to decide based on your needs.
Related
- Travel to Osaka? What to Know Before You Go
- Apollo Beach Motors: Dealership Overview
- Travel Ultrasound Jobs: How They Work
How pages are sourced and corrected: Sources and editorial policy.