Yes, Apollo Plumbing is a real, operating plumbing company that serves Marysville, Washington, along with the broader Snohomish County area. If you are searching for them, you likely saw their name in a local ad or on a review site; before you call, here is what you should actually know about their services, how they compare to other local plumbers, and how to get the best result from any plumbing visit.
Who Apollo Plumbing Is and Where They Work
Apollo Plumbing is a licensed and insured plumbing contractor based in the Pacific Northwest, with a service footprint that includes Marysville, Everett, Arlington, Lake Stevens, and other nearby cities in Snohomish County. They are not a national chain; they operate as a local, independently owned business, which means the person who answers the phone is likely the same person who shows up to your house. Their typical work covers residential and light commercial jobs, including water heater installation and repair, drain cleaning, leak detection, faucet and toilet replacement, and repiping older homes.
One important distinction: Apollo Plumbing is not the same as Apollo Home Services, which is a large franchise with locations in several states. If you search online, you may see both names. The Marysville-area Apollo is the local Snohomish County operation, so confirm you are calling the right number by checking the address and license number on their website or state contractor registration before booking.
What Services They Actually Offer
Apollo Plumbing’s service list is fairly standard for a full-service residential plumber, but a few items stand out because they are common in the Marysville area specifically:
- Water heater services – installation, repair, and maintenance for tank and tankless units. Marysville has hard water, so scale buildup is a frequent cause of premature failure.
- Drain cleaning – they use motorized augers and sometimes hydro-jetting for stubborn clogs in kitchen, bath, and main sewer lines.
- Leak detection and repair – including slab leaks and hidden wall leaks, often using electronic detection equipment rather than tearing open drywall blindly.
- Fixture replacement – faucets, toilets, garbage disposals, and shower valves, including updating older fixtures to meet current water-efficiency codes.
- Repiping – replacing old galvanized or polybutylene pipes, which are common in Marysville homes built in the 1970s–1990s.
They do not typically do large commercial new construction or municipal work, so if you are a business owner with a multi-story building, you may need a different contractor.
How to Verify a Plumber Before You Hire
Before any plumber starts work, you should check three things: licensing, insurance, and reviews. In Washington State, plumbers must hold a valid plumbing contractor license from the Department of Labor & Industries (L&I). You can look up Apollo Plumbing’s license status and any complaint history on the L&I website using their registered business name. Insurance is equally important – a licensed contractor should carry general liability and workers’ compensation; ask for proof and verify the policy is current.
For reviews, check Google, Yelp, and the Better Business Bureau. Look for patterns: do multiple reviews mention the same issue, such as arriving late, leaving a mess, or charging more than the estimate? One bad review is not a red flag, but repeated complaints about the same thing are. Also, ask for references from recent jobs in Marysville – a reputable plumber will have no problem giving you a few names.
Common Problems in Marysville Homes
Marysville’s housing stock is a mix of older single-family homes, newer developments, and manufactured housing. That variety creates specific plumbing issues you should watch for:
- Hard water scale – the city’s water is moderately hard, which leaves white deposits on fixtures and shortens water heater lifespan. A water softener can help, but it is not always necessary.
- Old galvanized pipes – homes built before 1970 often have galvanized steel pipes that corrode from the inside, reducing water pressure and causing rusty water. Repiping is the permanent fix.
- Polybutylene pipes – used in the 1980s and 1990s, these gray plastic pipes are prone to cracking at fittings. If your home has them, a plumber can inspect the joints and recommend a phased replacement.
- Root intrusion in sewer lines – Marysville’s clay soil and mature trees mean roots can grow into older clay or cast-iron sewer pipes. Annual drain cleaning or a camera inspection can catch this early.
If you notice recurring clogs, gurgling drains, or a slow-flushing toilet, these are often signs of a main sewer line issue, not a simple fixture problem. A camera inspection is the standard diagnostic tool.
Costs and Pricing Expectations
Plumbing prices in Snohomish County are generally in line with the Seattle metro area, which is slightly above the national average. For a typical service call, you can expect:
- Diagnostic visit – $75 to $150, which covers the plumber coming out and assessing the problem. Many companies waive this if you proceed with the repair.
- Simple repairs – a toilet flapper, faucet cartridge, or minor leak repair runs $150 to $300 including parts and labor.
- Water heater replacement – $1,200 to $2,500 for a standard 40–50 gallon tank unit, installed. Tankless units run higher, often $2,500 to $4,500.
- Drain cleaning – $150 to $350 for a basic auger of one line; hydro-jetting is more, often $300 to $600.
- Repiping – this is the big one, usually $5,000 to $15,000 depending on house size and whether walls need to be opened.
Always get a written estimate before work begins. A reputable plumber will give you a flat price for a defined scope of work, not an hourly rate that can balloon. Ask if the estimate includes materials, permits, and cleanup.
How Apollo Compares to Other Local Plumbers
Marysville has several plumbing options: national chains like Roto-Rooter, other local independents, and handyman services that do light plumbing. Apollo sits in the local independent category, which has a few advantages and disadvantages compared to the alternatives.
Compared to a national chain, a local company often has lower overhead, so their hourly rates may be slightly lower, and they are more likely to offer personalized service. However, national chains have larger fleets, which can mean faster response times for emergencies. Compared to a handyman, a licensed plumber like Apollo is required to pull permits for major work, which protects you if something goes wrong. A handyman may be cheaper for a simple faucet swap, but they cannot legally do water heater installations or repiping in most jurisdictions.
One practical tip: for emergency services, ask if Apollo has a 24/7 on-call plumber. Many small companies do, but they may charge a higher after-hours rate. For non-urgent work, scheduling flexibility is more important than speed.
Safety and Permits: What You Must Know
Plumbing work in Washington State is regulated for good reason – a bad installation can cause water damage, gas leaks, or contamination of the water supply. For any job that involves changing the plumbing system’s configuration, such as moving a drain, installing a water heater, or repiping, a permit is required from the city or county. A licensed plumber will pull the permit and schedule the inspection. If a contractor tells you a permit is not needed for a major job, that is a red flag.
For gas water heaters, the work must also comply with the state’s mechanical code, including proper venting and a carbon monoxide detector in the vicinity. If you smell gas during any repair, leave the house immediately and call your gas utility, not the plumber.
Frequently Asked Questions
Does Apollo Plumbing offer emergency service in Marysville? Yes, they advertise 24/7 emergency availability, but after-hours calls typically carry a premium. Call their main number and listen for the emergency option; if you get voicemail, try another local plumber who can answer immediately.
How long does a water heater installation take? A standard tank replacement usually takes 3 to 5 hours, including draining the old unit, hauling it away, and installing the new one. Tankless installations can take a full day if new venting or gas lines are needed.
Do I need to be home during the repair? For most repairs, yes, at least for the first hour so the plumber can access the work area and you can approve the final scope. For a simple fixture swap, you can often leave after the plumber arrives and they will lock up when done.
Will Apollo Plumbing give me a free estimate? They offer free estimates for larger projects like repiping or water heater replacement, but standard diagnostic visits have a fee. Clarify this when you call so there are no surprises.
Can they fix a sewer line that has tree roots? Yes, they can clear roots with an auger or hydro-jet, but if the pipe is cracked or collapsed, a trenchless repair or full replacement may be necessary. A camera inspection will determine which approach is right.
What payment methods do they accept? Most local plumbers accept credit cards, checks, and cash. Ask about financing for large jobs; many companies offer third-party financing plans, but interest rates vary.
Related
- Vrbo Bernard’s Landing at Smith Mountain Lake
- Yoga Landing Signal Mountain: Trails & Tips
- Stripers Landing Smith Mountain Lake: Full Guide
How pages are sourced and corrected: Sources and editorial policy.