OneStopList

Gods and goddesses

Makita FS2701 Screwdriver: Specs and Use

Updated November 17, 2026

The Makita FS2701 is a discontinued 6.35 mm (1/4-inch) hex chuck electric screwdriver, notable for its compact body and high-speed 2,600 RPM motor, designed primarily for driving screws in wood and drywall. It is a corded tool that was part of Makita’s standard lineup, and while no longer in production, it remains a common find on resale markets and in professional tool kits.

Background and Place in Makita’s Lineup

Makita introduced the FS2701 as part of its corded screwdriver series, which sits between basic drill/drivers and impact drivers. The FS2701 was aimed at tradespeople who needed a lightweight, dedicated screw-driving tool without the bulk of a drill. It shares its motor platform with the FS2200 and FS2300 models, but the FS2701 offers a higher no-load speed. The tool was sold as a bare unit or in a kit with a case and bits, depending on the region. Makita has since replaced this line with brushless cordless models, but the FS2701’s simple, durable construction keeps it in demand for light assembly work and repetitive tasks.

Key Specifications and Features

  • Chuck: 6.35 mm (1/4-inch) hex, accepts standard screwdriver bits
  • No-load speed: 2,600 RPM
  • Motor: 120V AC (US version), 230V AC (EU version), 240W input
  • Max torque: Approximately 5.5 N·m (49 in-lbs) – sufficient for drywall and softwood screws
  • Weight: 1.3 kg (2.9 lbs) without cord
  • Cord length: 2.5 meters (8.2 feet)
  • Reverse switch: Yes, located above the trigger
  • Variable speed trigger: Yes, allows controlled starts

The FS2701 does not have a clutch, meaning torque is controlled entirely by the user’s trigger pressure. This is a common feature of dedicated screwdrivers, as it keeps the tool light and simple. The hex chuck is spring-loaded, allowing quick bit changes with one hand.

How It Works and When to Use It

The FS2701 operates like a standard electric screwdriver: pulling the trigger rotates the hex chuck, which drives the bit. The variable-speed trigger lets you start slowly to avoid stripping screw heads, then speed up as the screw seats. The reverse switch is used for removing screws. Because it lacks a clutch, the FS2701 is best for jobs where you can feel the screw bottoming out, such as:

  • Driving drywall screws into wooden studs
  • Assembling furniture or cabinets
  • Fastening decking boards (with pre-drilled holes)
  • Electrical outlet box screws

It is not suitable for heavy-duty drilling, masonry, or driving large lag bolts, as the motor will stall and the lack of a clutch can twist your wrist if the bit binds. For those tasks, a drill/driver or impact driver is the correct tool.

Common Problems and Maintenance

Owners of the FS2701 report a few recurring issues, mostly due to age. The most common is a worn carbon brush, which causes sparking inside the motor and loss of power. Replacing the brushes is straightforward: remove the two caps on the motor housing, pull out the old brushes, and insert new ones. Makita part number CB-303 is the standard replacement, though aftermarket options exist. Another issue is a sticky trigger, often caused by dust accumulation; cleaning with compressed air and a drop of light oil resolves it. The cord can also become brittle over time – if the outer insulation cracks, replace the cord or have a professional do it, as this is a safety hazard. The hex chuck itself rarely fails, but if it does, the entire front assembly must be replaced.

Comparison with Modern Alternatives

When compared to current Makita models, the FS2701 is heavier and slower than the brushless cordless screwdrivers like the DF333D or the XFD11. The corded FS2701 offers unlimited runtime, which is an advantage for all-day production work, but the cord limits mobility. In terms of torque, the FS2701’s 5.5 N·m is lower than a typical 12V max screwdriver (around 20 N·m) but higher than a precision electric screwdriver (around 2 N·m). The FS2701’s 2,600 RPM is faster than most cordless screwdrivers, which typically max out at 1,500-2,000 RPM. This makes the FS2701 better for rapid drywall work, but worse for delicate tasks where high speed can strip screws. If you already own a modern drill/driver, the FS2701 offers no functional advantage; its appeal is purely as a cheap, reliable backup or for users who prefer corded tools.

Cost and Where to Find One

Since the FS2701 is discontinued, you will not find it in new retail stores. The secondary market is your main source:

  • Used units on eBay or Craigslist typically sell for $20–$40 USD, depending on condition.
  • Refurbished units from tool resellers may cost $50–$70 USD.
  • Parts (brushes, chucks, switches) are still available from Makita authorized dealers and online parts stores.

Before buying a used FS2701, ask for a photo of the inside of the chuck and the condition of the cord. Run a test if possible: plug it in, listen for abnormal grinding (worn bearings), and check that the reverse switch clicks firmly. If the tool smells like burnt plastic, the motor may be overheated from overuse, and it is not worth repairing.

Safety and Proper Usage Tips

  • Always unplug the tool before changing bits or cleaning the chuck.
  • Wear safety glasses – screws can snap and fly at high speed.
  • Do not use the FS2701 as a drill; the hex chuck is not designed for round shank drill bits.
  • When driving screws near edges, reduce speed to prevent splitting the wood.
  • If the tool stalls, release the trigger immediately to avoid burning out the motor.
  • Keep the ventilation slots clear of sawdust; blocked airflow causes overheating.

Because the FS2701 lacks a clutch, you must be disciplined with trigger control. Practice on scrap wood to learn the feel of the tool before working on finished surfaces. Also, note that the FS2701 is not double-insulated in all versions – check the label; if it has a two-prong plug, it is double-insulated, but if it has a three-prong plug, it requires a grounded outlet.

Frequently Asked Questions

Is the Makita FS2701 a drill? No, it is a dedicated screwdriver. It has a 1/4-inch hex chuck that only accepts screwdriver bits, not round drill bits. It cannot drill holes.

What is the torque of the FS2701? The rated torque is approximately 5.5 N·m (49 in-lbs). This is enough for drywall screws and small wood screws, but not for heavy lag bolts.

Can I use the FS2701 for drywall? Yes, it is well suited for drywall screw driving. The high speed and light weight make it efficient, but you must control the depth manually with the trigger.

Does the FS2701 have a clutch? No, it does not. It relies entirely on the user’s trigger pressure to control depth and torque.

Where can I buy a new FS2701? It is discontinued, so new units are not available. Look for used or refurbished units online, or check local tool repair shops that may have old stock.

What is the difference between FS2701 and FS2200? The FS2701 has a higher no-load speed (2,600 RPM vs. 2,200 RPM) and slightly more power. The FS2200 is otherwise similar in size and features.

Related

How pages are sourced and corrected: Sources and editorial policy.