OneStopList

Gods and goddesses

Lakes Concrete Bemidji: What It Is & How to Use It

Updated November 17, 2026

Lakes Concrete Bemidji is a ready-mix concrete supplier serving the Bemidji, Minnesota area, providing standard and specialty concrete mixes for residential, commercial, and agricultural projects. The company operates a batch plant that delivers fresh concrete by truck, and it also sells bagged concrete and related supplies for smaller jobs. This article explains what Lakes Concrete offers, how to order, what to expect during delivery, and common questions homeowners and contractors have about working with this local supplier.

Background: Who Is Lakes Concrete?

Lakes Concrete is a locally owned ready-mix company based in Bemidji, in north-central Minnesota. It has been serving the region for several decades, though exact founding dates are not widely publicized. The company supplies concrete to builders, contractors, and DIY homeowners across Beltrami County and surrounding areas, including Cass, Hubbard, and Clearwater counties.

The name “Lakes” reflects the area’s identity—Bemidji is known as the “First City on the Mississippi” and sits near hundreds of lakes. The company’s primary business is delivering wet concrete in mixer trucks from its plant, but it also stocks bagged mix, rebar, wire mesh, and other concrete accessories. Unlike large national chains, Lakes Concrete is a regional supplier, which means it can offer more personalized service and faster delivery times for local projects.

How Ready-Mix Concrete Delivery Works

When you order concrete from Lakes Concrete (or any ready-mix plant), the process follows a standard sequence:

  1. Calculate your needs: Determine the volume of concrete required in cubic yards. For a slab, multiply length (ft) × width (ft) × thickness (ft) and divide by 27.
  2. Place an order: Call the plant, specify the mix design (e.g., 3000 PSI, 4000 PSI), and schedule a delivery time. You’ll need to provide a job site address and any special instructions (like access for the truck).
  3. Prepare the site: Have forms, reinforcement, and a stable path for the truck. The driver needs to get within about 100 feet of the pour area, or you’ll need a pump or wheelbarrow.
  4. Delivery and placement: The truck arrives and discharges the concrete into your forms or into a pump hopper. You have roughly 60–90 minutes before the mix begins to set, depending on temperature and additives.
  5. Finishing and curing: After placement, you must finish the surface (screed, float, trowel) and then cure it properly by keeping it moist for at least 5–7 days.

Lakes Concrete typically delivers Monday through Saturday, with limited Sunday hours. It’s advisable to order at least a day in advance, especially during peak construction season (May–September).

Choosing the Right Mix for Your Project

Concrete strength is measured in pounds per square inch (PSI). The higher the PSI, the stronger the cured concrete. Lakes Concrete offers several standard mixes, and you can also request custom mixes with additives like air entrainment (for freeze-thaw resistance) or accelerators (for cold weather).

  • 2500 PSI: Suitable for non-structural uses like sidewalks, patios, and footings that won’t bear heavy loads.
  • 3000 PSI: The most common residential mix, good for driveways, garage floors, and house foundations.
  • 4000 PSI: For heavier loads like commercial slabs, shop floors, or areas with truck traffic.
  • 5000+ PSI: Used for structural columns, beams, or specialized precast elements; rarely needed for typical home projects.

For outdoor applications in Minnesota’s harsh winters, always request air-entrained concrete. Tiny air bubbles within the mix allow water to expand without cracking the concrete during freeze-thaw cycles. Lakes Concrete can also supply fiber-reinforced mixes that reduce the need for wire mesh in slabs.

Common Problems and How to Avoid Them

Even with a reliable supplier, concrete projects can fail if basic rules are ignored. Here are the most frequent issues and their solutions:

  • Slab cracking: Cracks often result from poor subgrade preparation or lack of control joints. Ensure the ground is compacted and cut control joints every 8–10 feet in a slab.
  • Scaling or surface flaking: This happens when non-air-entrained concrete is exposed to deicing salts. Always use air-entrained mix for exterior flatwork.
  • Delayed setting: In cold weather, concrete sets slowly. Use accelerators or insulating blankets. In hot weather, use retarders or pour early in the morning.
  • Honeycombing: Voids left after form removal occur when concrete isn’t properly vibrated. Make sure to consolidate the mix with a vibrator or by rodding.
  • Ordering too little: Always order 10% extra to account for waste, uneven subgrade, or spillage. It’s cheaper than ordering a second short load.

Lakes Concrete’s dispatchers can help you estimate quantities if you provide your dimensions, but it’s wise to double-check with a concrete calculator online.

Costs and Ordering Considerations

Concrete is priced per cubic yard, and the final cost depends on the mix strength, additives, and delivery distance. In the Bemidji area, typical prices range from $120 to $160 per cubic yard for standard 3000 PSI mix (as of 2024). Additional charges may apply for:

  • Short loads (less than 5 yards) – often a flat surcharge.
  • Fuel surcharges – vary with diesel prices.
  • After-hours or weekend delivery – higher rates.
  • Pump rental – if the truck can’t reach the pour area, you’ll need a concrete pump, which costs extra.

When you call Lakes Concrete, have your credit card ready or ask about payment terms. Most small orders require payment at delivery, while contractors may have open accounts. Always confirm the total cost before the truck leaves the plant.

Safety and Environmental Considerations

Concrete is alkaline and can cause severe skin burns if it contacts bare skin. Always wear waterproof gloves, long sleeves, and eye protection when handling wet concrete. If concrete gets on your skin, rinse immediately with clean water.

Washout water from concrete trucks is highly alkaline and must not be dumped into storm drains or lakes. Lakes Concrete follows Minnesota Pollution Control Agency regulations for washout disposal, but as a customer, you should also plan for clean-up. Use a designated washout pit or a containment bin to prevent runoff.

For DIYers, never attempt to pour concrete in freezing temperatures without proper cold-weather procedures. Concrete that freezes before it gains strength will be permanently weakened.

Alternatives to Ready-Mix Concrete

If your project is too small for a delivery (less than 1 yard), consider these alternatives:

  • Bagged concrete mix: Available at hardware stores, these pre-mixed bags (typically 60 or 80 lbs) only require water. They are ideal for setting posts, small repairs, or stepping stones.
  • Quikrete or Sakrete products: These brands offer specialized mixes like fast-setting, high-strength, or crack-resistant. Lakes Concrete may stock some, but local hardware stores have a wider variety.
  • Concrete overlay or resurfacer: For existing slabs with minor damage, a bagged overlay can restore the surface without a full pour.
  • Other materials: For patios, consider pavers or flagstone, which don’t require curing time and are easier for DIY installation.

For any project over 1 cubic yard, ready-mix is usually more economical and consistent than bagged mix, so Lakes Concrete is a practical choice.

Frequently Asked Questions

How far in advance do I need to order?

It’s best to call at least 24 hours ahead, especially during busy season. For large pours (10+ yards) or special mixes, give 2–3 days notice. On the day of delivery, the truck typically arrives within the window you schedule, but delays can happen due to traffic or other jobs.

Can I pour concrete in winter in Bemidji?

Yes, but it requires special precautions. Lakes Concrete can provide cold-weather mix with accelerators, and you must use insulated blankets or heated enclosures to keep the concrete above 50°F for the first few days. Many contractors pour in winter, but it costs more due to additives and protection.

How much concrete do I need for a 10×10 slab?

For a 10×10 slab that is 4 inches thick, you need 10 × 10 × (4/12) = 33.33 cubic feet, which is about 1.23 cubic yards. Add 10% for waste, so order 1.4 yards. Lakes Concrete will likely charge a short-load fee for less than 5 yards, so consider combining with other projects or using bagged mix.

Does Lakes Concrete sell bagged mix?

Yes, they typically stock bags of standard concrete mix, mortar, and sand. However, selection may be limited compared to a hardware store, so call ahead to check availability. They also sell rebar, wire mesh, and curing compounds.

What if my driveway is too far for the truck to reach?

If the truck can’t access the pour area, you have two options: rent a concrete pump (a truck-mounted or line pump) or use wheelbarrows. A pump is the most efficient and costs around $300–$500 for a small job. Lakes Concrete can recommend a local pump service.

How long does concrete take to cure?

Concrete reaches about 70% of its strength in 7 days and 100% in 28 days. You can walk on it after 24–48 hours, but avoid heavy loads for at least a week. Keep the surface moist or covered with plastic for at least 5 days to prevent cracking.

Related

How pages are sourced and corrected: Sources and editorial policy.