OneStopList

Gods and goddesses

Magnetic Field Strength: Units, Meaning, and How to Measure It

Updated November 17, 2026

Magnetic field strength is a measure of the intensity of a magnetic field, typically expressed in units of tesla (T) or gauss (G). It quantifies the force a magnetic field exerts on moving charges, and its value depends on both the source of the field and the distance from that source.

What Exactly Is Magnetic Field Strength?

In physics, the term “magnetic field strength” can refer to two distinct but related quantities: the magnetic field B (magnetic flux density) and the magnetic field H (magnetic field intensity). In everyday usage, people usually mean B, which is the field that exerts a force on moving charges and is measured in tesla (T) in the SI system, or gauss (G) in the CGS system (1 T = 10,000 G). The Earth’s magnetic field is about 0.00005 T (0.5 G), a typical refrigerator magnet is about 0.001 T (10 G), and an MRI machine uses fields of 1.5 to 3 T.

The H field, measured in amperes per meter (A/m), describes how a magnetic field is created by electric currents and is independent of the material response. In free space, B and H are related by B = μ₀H, where μ₀ is the vacuum permeability. In materials, the relationship is more complex due to magnetization.

How Magnetic Field Strength Is Measured

Several instruments measure magnetic field strength, each suited to different ranges and purposes:

  • Hall effect sensors: Use the voltage generated across a conductor in a magnetic field. They are common in smartphones and industrial equipment, measuring fields from about 0.1 mT to several tesla.
  • Fluxgate magnetometers: Use a saturable core to measure very small fields, from nanotesla to millitesla, often used in geophysics and space exploration.
  • Magnetoresistive sensors: Detect changes in electrical resistance due to magnetic fields, used in compasses and current sensors.
  • Nuclear magnetic resonance (NMR) magnetometers: Provide extremely precise measurements by detecting the precession frequency of atomic nuclei, used for calibrating high-field magnets.

For a simple practical measurement, a smartphone’s magnetometer (usually a Hall effect sensor) can display the local field in microtesla (µT) using various apps, though accuracy is limited.

Why Magnetic Field Strength Varies: Distance and Source

The strength of a magnetic field depends on the source and the distance from it. For a long straight wire carrying current I, the field at distance r is B = μ₀I / (2πr), so it decreases linearly with distance. For a magnetic dipole (like a bar magnet), the field falls off as 1/r³, meaning it decreases rapidly with distance. This is why a magnet’s pull weakens noticeably as you move it away from a surface.

For a solenoid (a coil of wire), the field inside is approximately B = μ₀nI, where n is the number of turns per unit length and I is the current. This is why electromagnets can achieve very high fields by increasing current and turns.

Common Misconception: Magnetic Field Strength vs. Magnetic Flux

Many people confuse magnetic field strength (B) with magnetic flux (Φ). Magnetic flux is the total magnetic field passing through a given area, calculated as Φ = B·A·cos(θ), where A is the area and θ is the angle between the field and the normal to the area. Flux is measured in webers (Wb). A strong field can have low flux if it passes through a tiny area, and a weak field can have high flux if it covers a large area. This distinction is crucial in designing transformers and electric motors.

How to Choose a Magnet Based on Field Strength

When selecting a magnet for a practical application, field strength is only one factor. Consider the following:

  • Magnet grade: Neodymium magnets are the strongest permanent magnets, with grades like N52 having a maximum energy product of about 52 MGOe. Ferrite magnets are much weaker but cheaper and more resistant to demagnetization.
  • Shape and size: A larger magnet generally has a stronger field at a given distance, but the shape matters. A disc magnet has a different field distribution than a bar magnet.
  • Working distance: The field strength at the surface (surface gauss) is often quoted, but the field at a distance of 10 mm is what matters for many applications. Always check the pull force or field strength at the required distance.
  • Temperature tolerance: Neodymium magnets lose strength at high temperatures and can demagnetize permanently above their maximum operating temperature (typically 80°C for standard grades, but up to 200°C for high-temperature grades).

For example, a small N52 disc magnet (10 mm diameter, 5 mm thick) has a surface field of about 0.4 T (4,000 G), but at 10 mm away it drops to roughly 0.02 T (200 G).

Safety and Health Considerations

Magnetic fields are generally harmless at everyday levels, but strong fields can be dangerous. The International Commission on Non-Ionizing Radiation Protection (ICNIRP) sets guidelines for exposure to static magnetic fields: the general public limit is 400 mT (0.4 T) for continuous exposure, and occupational limits are higher. Strong magnets can interfere with medical devices such as pacemakers and insulin pumps, so people with such devices should avoid close proximity to strong magnets (typically above 0.5 mT).

Physical hazards include pinching injuries from strong neodymium magnets, which can break bones if they snap together. Swallowing multiple small magnets can cause severe intestinal damage. Always keep strong magnets away from children and electronic media like credit cards, watches, and hard drives.

Magnetic Field Strength in Everyday Technology

Magnetic field strength is a critical parameter in many technologies:

  • MRI machines: Use superconducting magnets with fields of 1.5 to 3 T to align proton spins in the body. Higher fields (7 T) are used in research for better resolution.
  • Hard disk drives: Use magnetic fields to read and write data on platters. The write head generates a field of about 0.5 T, but the stray field is much lower.
  • Electric motors and generators: Rely on the interaction between magnetic fields and current to convert energy. Field strength directly affects torque and efficiency.
  • Magnetic levitation trains: Use superconducting magnets to create fields strong enough to lift a train. The field strength is about 0.5 T in the track.
  • Particle accelerators: Like the Large Hadron Collider, use dipole magnets with fields of about 8.3 T to steer particles.

Frequently Asked Questions

What is the difference between tesla and gauss?

Tesla (T) is the SI unit of magnetic flux density, while gauss (G) is the CGS unit. One tesla equals 10,000 gauss. For example, a refrigerator magnet is about 10 G (0.001 T), while the Earth’s field is about 0.5 G (0.00005 T).

How strong is a 1 tesla magnet?

A 1 tesla magnet is quite strong: it’s about 20,000 times the Earth’s magnetic field. It can lift a small car if shaped appropriately. For comparison, an MRI machine uses 1.5 to 3 T, and the strongest permanent magnets (neodymium) have surface fields of about 0.4 to 0.5 T.

Can I measure magnetic field strength with my phone?

Yes, most smartphones have a magnetometer that measures the magnetic field in three axes, typically with a resolution of about 0.1 µT. You can use apps like “Magnetic Field Detector” to see the field strength in microtesla. However, the accuracy is limited for strong magnets, and the sensor can saturate above about 1 mT.

What is the strongest magnetic field ever created?

The strongest continuous magnetic field ever produced in a laboratory is about 45 T, achieved by hybrid magnets at the National High Magnetic Field Laboratory in the US. Pulsed magnets can reach about 100 T, and explosive-driven flux compression has produced fields over 2,800 T, but only for microseconds.

Does magnetic field strength decrease with distance?

Yes, always. For a point dipole, the field decreases as the inverse cube of distance (1/r³). For a long straight wire, it decreases as 1/r. This means that doubling the distance from a magnet reduces the field to one-eighth of its original value (for a dipole).

Are stronger magnets always better?

Not necessarily. Stronger magnets are harder to handle, can interfere with electronics, and may be more expensive. For applications like holding notes on a fridge, a weak ferrite magnet suffices. For lifting heavy objects, a strong neodymium magnet is needed. Always match the field strength to the application to avoid accidents.

Related

How pages are sourced and corrected: Sources and editorial policy.