Iss Vanguard is a cooperative, campaign-driven board game where 1–4 players take on the roles of elite astronauts exploring a mysterious alien planet. You play by moving your character across a modular map, resolving skill checks with custom dice, and managing a persistent ship log between missions. This guide explains the core loop, setup, and key mechanics so you can start your first expedition with confidence.
What Is Iss Vanguard?
Iss Vanguard is a 2021 game by Awaken Realms, designed by Marcin Świerkot and Michał Oracz. It is part of the “Dungeon Crawler” genre but set in a sci-fi universe. The game is fully cooperative: everyone wins or loses together. It uses a unique “expedition” system where each session is one mission on an alien world, and between missions you return to your ship, the ISS Vanguard, to upgrade equipment and resolve story events.
The game is known for its high production value, with detailed miniatures, a large campaign book, and a companion app (though the app is optional). It plays in about 2–3 hours per mission, and a full campaign lasts roughly 40–60 hours. It is not a legacy game (nothing is destroyed), but it does use a persistent save system via a “ship log” and stickers on your character sheets.
Core Gameplay Loop
Each mission follows a simple structure:
- Setup: Place the mission tiles, enemies, and your astronauts on the starting zones.
- Exploration: On your turn, you move up to your speed, then take one action (attack, interact, use a skill, or rest).
- Skill Checks: When you attempt something risky, you roll a pool of custom dice based on your character’s stats and any bonuses. Each die has success, failure, and “advantage” faces.
- Combat: Enemies act on a simple AI card. You resolve attacks by rolling dice and comparing results to enemy defense values.
- Objective: Each mission has a primary goal (e.g., scan a relic, rescue a survivor, or destroy a generator). Once completed, you must reach an extraction point to finish.
After the mission, you return to the ship. Here you can spend “science points” to unlock new technologies, assign crew to departments (like Engineering or Medical), and read story entries in the campaign book. This downtime is just as important as the mission itself.
How to Set Up Your First Game
Start with the “Prologue” mission in the campaign book. You will need:
- 1–4 astronaut miniatures and their corresponding character sheets.
- The mission tiles indicated in the book (they are numbered).
- Enemy miniatures and their AI cards.
- The custom dice (about 10 per player is recommended).
- The ship board and the four department boards (Science, Engineering, Medical, and Command).
Each player picks an astronaut class: Soldier (combat focus), Engineer (interactions and gadgets), Scientist (skill checks and analysis), or Medic (healing and support). For your first game, the Soldier and Engineer are the easiest to learn. Place your character on the start tile, shuffle the enemy cards, and read the mission briefing aloud. The game is fully co-op, so you can discuss strategy openly.
Understanding Dice and Skill Checks
The core resolution mechanic is the dice pool. Each die has:
- Success (S): Counts toward meeting the difficulty number.
- Failure (F): No effect, but some failures trigger consequences.
- Advantage (A): Counts as a success and also lets you activate a special ability or reroll a die.
When you make a check, the mission book tells you a difficulty (e.g., 3 successes). You roll a number of dice equal to your relevant stat (e.g., 4 dice for Strength). You may also apply bonuses from equipment or crew members. If you meet or exceed the difficulty, you succeed. If you roll more failures than successes, you may suffer a “wound” or lose a turn. Advantage dice are rare but powerful—they let you trigger your character’s unique ability.
Combat works similarly: you roll dice to attack, and the enemy’s defense value tells you how many successes you need to land a hit. Enemies also roll dice when they attack you, but you can use your “armor” value to reduce the number of successes they need.
Ship Phase: Between Missions
After each mission, you enter the ship phase. This is not just bookkeeping; it drives the story. You will:
- Resolve story events: Read the next entry in the campaign book, which may give you choices that affect future missions.
- Spend science points: These are earned during missions by scanning anomalies or completing side objectives. You use them to unlock new equipment cards, ship modules, or crew upgrades.
- Assign crew: Each department has a track (e.g., Engineering level 1–3). By placing crew members (represented by tokens) you unlock passive bonuses like extra dice on certain checks.
- Heal and rest: Remove wounds from your character sheet, and restore your “health” to full.
The ship phase is also where you manage your “hull integrity.” If the hull is damaged during missions, you must repair it here or risk losing the campaign. The game is forgiving early on, but later missions can permanently damage your ship if you ignore repairs.
Common Mistakes New Players Make
Here are the most frequent errors, according to the rulebook and community discussions:
- Forgetting to use advantage dice: Advantage is not just a success—it also lets you activate your character’s ability. Many new players ignore this and lose out on powerful effects.
- Not managing threat: Each mission has a “threat level” that increases as you take actions. When it hits a threshold, enemies spawn or the mission gets harder. You can reduce threat by using certain skills or resting, but you must plan around it.
- Splitting the party too much: The game is co-op, but enemies are strong. It is usually better to stay in pairs so you can support each other.
- Ignoring the ship phase: Spending science points is not optional—if you skip upgrades, later missions become nearly impossible. Always prioritize at least one new weapon or armor piece per mission.
Also, note that the rulebook has a section on “solo play” if you are playing alone. You control two astronauts instead of one, which is the recommended way to play solo.
How to Choose Your Astronaut Class
Your class determines your starting stats and unique ability. Here is a quick breakdown:
- Soldier: High Strength and Health. Best for combat. Their ability lets them reroll a failed attack die once per turn.
- Engineer: High Intellect and Interaction. Best for disabling traps and fixing equipment. Their ability lets them ignore one failure on a skill check.
- Scientist: High Observation and Analysis. Best for scanning alien artifacts and identifying enemy weaknesses. Their ability gives the team an extra die on any check once per mission.
- Medic: High Empathy and Agility. Best for healing and moving quickly. Their ability lets them heal a wound from an adjacent ally as a free action.
For a balanced team, take one Soldier, one Engineer, and one of the other two. If you are playing with two players, Soldier + Engineer is the most forgiving combo. The game does not force a specific team, so feel free to experiment.
Frequently Asked Questions
How long does a full campaign take? A complete campaign of Iss Vanguard is about 40–60 hours, depending on how many side missions you do. Each mission is 2–3 hours, and there are roughly 15–20 missions in the main story. You can pause between missions and come back later because the game saves your progress via the ship log and stickers.
Can I play solo? Yes. The rulebook includes a solo mode where you control two astronauts instead of one. The game is fully cooperative, so there is no hidden information that would make solo play difficult. Many players say solo is just as fun as multiplayer.
Do I need the companion app? No, the app is optional. It provides music, narration, and a dice roller, but the physical game is complete without it. Some players prefer the app for convenience, but you can play entirely with the book and dice.
Is Iss Vanguard a legacy game? No, it is not legacy. You do not destroy cards or permanently alter the board. However, you do use stickers on your character sheet and write in the ship log, so you cannot easily reset the campaign. You can buy a new copy if you want to replay from scratch.
What is the difference between Iss Vanguard and other dungeon crawlers like Gloomhaven? Iss Vanguard is more story-driven and has a heavier emphasis on skill checks and dice rolling, while Gloomhaven uses card-based action selection and a tactical grid. Iss Vanguard also has a persistent ship phase that feels like a management mini-game. If you prefer narrative and dice luck, choose Iss Vanguard; if you prefer pure tactical puzzles, choose Gloomhaven.
What is the recommended player count? The game plays best with 3 players. With 2, you have fewer actions per turn, and with 4, the missions can feel crowded. However, the game scales enemy counts and difficulty based on player count, so any number from 1 to 4 works. The rulebook suggests 3 for the best experience.
Final Tips for Your First Expedition
Before you start, read the “Quick Start” section in the rulebook—it is only two pages and explains the turn order clearly. During your first mission, do not worry about winning; focus on learning the dice mechanics and the flow of exploration. The game is forgiving in the prologue, so you have room to make mistakes. Keep your astronaut sheets organized, and always check the mission brief for special rules like “noise” or “radiation” that add extra dice to your pool. Most importantly, remember that Iss Vanguard is a story experience—take time to read the flavor text aloud and enjoy the alien world you are uncovering.
Related
- Artemis Greek Mythology Stories: Key Myths & Facts
- Demeter Fragrance Popular Scents: Top Picks
- Demeter Domain Meaning & How to Use It
How pages are sourced and corrected: Sources and editorial policy.