OneStopList

Gods and goddesses

EA Flood Storage Areas: How They Work & Why They Matter

Updated November 20, 2026

EA flood storage areas are designated land, often managed by the Environment Agency (EA) in England, that is intentionally allowed to flood during high river flows to reduce flood risk downstream. They work by temporarily storing excess water and releasing it slowly after the peak has passed, protecting towns and cities. This article explains how they function, their benefits, and what you need to know if you live near one.

What Are Flood Storage Areas?

Flood storage areas (FSAs) are natural or engineered basins alongside rivers that are designed to hold floodwater during extreme events. Unlike permanent reservoirs, they are usually dry and used for agriculture or recreation most of the time. The Environment Agency (EA) operates many of these in England, but similar concepts exist worldwide under names like flood bypasses, detention basins, or washlands. The key is that they are not continuously wet—they only fill when the river exceeds a certain level.

How Do They Work?

The principle is simple: give the river extra room to spread out. When river flow exceeds the channel capacity, water spills over a weir or through an inlet structure into the storage area. The area holds the water, reducing the peak flow downstream. After the flood peak passes, the stored water is released gradually through an outlet structure, often a culvert or a controlled gate, so that it does not add to the downstream flood.

Key components include:

  • Inlet structure: A weir or gap in the riverbank that allows water to enter the storage area.
  • Storage basin: The land that holds water, which can be natural floodplain or excavated.
  • Outlet structure: A controlled or uncontrolled outlet that releases water slowly.
  • Embankments: Raised banks that contain the water within the designated area.

Some FSAs are passive, meaning they fill and drain automatically. Others have active controls, such as sluice gates operated by EA staff, to optimize storage and release timing.

Why Does the EA Use Them?

The Environment Agency uses flood storage areas as part of a broader flood risk management strategy. They are often more cost-effective and environmentally friendly than building higher walls or levees. By allowing floodplains to function naturally, they also create wildlife habitats and reduce the speed of water, which can decrease erosion and sediment transport. The EA maintains a network of over 200 flood storage areas across England, many built after major floods, such as the 2007 summer floods that prompted significant investment in flood defenses.

Choosing a Flood Storage Area Design

Designing an FSA involves balancing several factors:

  • Storage capacity: The volume needed to reduce the design flood peak to a safe level.
  • Location: Upstream of the area to be protected, but not so far that tributaries add too much flow.
  • Land use: Existing agriculture, ecology, and community impact.
  • Outlet control: Whether a fixed orifice, weir, or active gate is most reliable.
  • Maintenance: Access for inspection and clearing of debris.

Engineers use computer models to simulate river flows and determine the optimal size and operation. For example, the Stourmouth FSA in Kent was designed to protect the village of Stourmouth and surrounding farmland, with a capacity of about 1.5 million cubic meters.

Common Issues and Misconceptions

One common misconception is that flood storage areas are always full of water. In reality, they are often dry and used for grazing or sports fields. Another is that they are a universal solution; they work best for river flooding, not for surface water or coastal flooding. A frequent issue is that storage areas can become waterlogged for days, affecting farming, and they may require compensation for landowners. Also, if not maintained, vegetation growth or sediment can reduce capacity over time.

Another concern is that people may build on designated flood storage areas, which can reduce their effectiveness. The EA has strict policies to prevent this, but it remains a challenge in urban planning.

Flood Storage Areas vs. Other Defenses

Flood storage areas are often compared to other measures like levees, flood walls, and river channel widening. Levees contain the river but can increase flow speed and downstream flood risk. Channel widening gives the river more room but may require significant land and can alter habitats. FSAs are unique because they temporarily store water, reducing peak flow rather than just containing it. They are also more natural than concrete walls, providing ecological benefits. However, they require a large land area and may not be feasible in densely built-up areas.

Costs and Funding

The cost of building a flood storage area varies widely based on size, land value, and engineering complexity. Small rural schemes might cost a few million pounds, while large urban projects can exceed £100 million. Funding in the UK typically comes from central government grants, local council contributions, and sometimes private investment. The EA also works with partners like the Regional Flood and Coastal Committees (RFCCs) to prioritize projects based on cost-benefit analysis. For example, the Leeds Flood Alleviation Scheme included a storage area upstream that cost around £50 million but is expected to protect thousands of homes.

Safety and Environmental Considerations

Safety is a primary concern. FSAs can be dangerous if people enter during flooding, as water can rise quickly and currents are unpredictable. The EA installs warning signs and sometimes barriers. Environmentally, FSAs can create wetlands that support birds, amphibians, and plants. However, they can also trap sediment and pollutants, so regular monitoring is needed. Invasive species can also be a problem. The EA assesses the ecological impact before construction and often enhances habitats as part of the project.

Frequently Asked Questions

Is it safe to live near a flood storage area?

Yes, but you should be aware that the area is designed to flood. The EA maintains these areas and provides flood warnings. You should check the flood risk maps and have a flood plan. Living near an FSA can actually reduce your flood risk compared to living downstream without protection.

Can I build on a flood storage area?

In most cases, no. The EA and local planning authorities restrict development on designated flood storage areas because it would reduce storage capacity and increase flood risk elsewhere. If you own land in such an area, you may need to apply for a flood risk activity permit for any changes.

How do I find out if I live near an EA flood storage area?

You can check the Environment Agency’s flood map for planning, which shows flood zones and storage areas. Additionally, local council planning documents often highlight these areas. You can also contact the EA directly for information.

What happens to the water after a flood?

The water is released slowly through the outlet structure, usually over hours or days, until the storage area is dry again. The rate of release is controlled to avoid causing downstream flooding. Farmers may need to wait for the land to dry before resuming normal use.

Do flood storage areas harm wildlife?

When designed well, they can actually benefit wildlife by creating temporary wetlands. However, if not managed properly, they can disrupt habitats. The EA typically conducts environmental assessments and may create new habitats as part of the scheme.

What is the difference between a flood storage area and a reservoir?

A reservoir is a permanent body of water, often used for water supply or hydroelectric power, and is not normally allowed to dry out. A flood storage area is dry most of the time and only fills during floods. Reservoirs can also provide flood storage, but they are primarily for other purposes.

Related

How pages are sourced and corrected: Sources and editorial policy.