OneStopList

Gods and goddesses

Why Group 6 Elements Have the Highest Melting Points

Updated November 19, 2026

Group 6 elements (chromium, molybdenum, tungsten, and seaborgium) have the highest melting points among all transition metals because of a unique combination of strong metallic bonding, half-filled d-orbitals, and a body-centered cubic crystal structure that maximizes bond strength while minimizing electron repulsion. Tungsten, with a melting point of 3,422°C, is the highest of any metal, and molybdenum follows at 2,623°C.

Where Group 6 Sits in the Periodic Table

Group 6 is the column containing chromium (Cr), molybdenum (Mo), tungsten (W), and seaborgium (Sg). These are transition metals, meaning their atoms have partially filled d-orbitals that participate in bonding. Moving down the group, the atomic radius increases and the d-orbitals become more diffuse, which changes how the atoms bond to each other.

What stands out about Group 6 is that its members have six valence electrons available for metallic bonding—two from the s-orbital and four from the d-orbital. This electron configuration is central to why their melting points are so high.

The Role of d-Orbital Electrons in Metallic Bonding

In a metal, melting point depends on how strongly the atoms are held together. For transition metals, the strength comes from the overlap of d-orbitals between neighboring atoms, creating a “sea” of delocalized electrons. The more electrons each atom contributes to this sea, the stronger the bond.

Group 6 elements have a d4s2 configuration in their atomic state. When they form a metallic solid, the s and d electrons all become delocalized. That gives each atom six electrons to share, which is more than most other transition metals. Compare this to Group 4 (titanium, zirconium, hafnium) with four valence electrons, or Group 5 (vanadium, niobium, tantalum) with five. The extra electron in Group 6 adds another bond per atom, raising the melting point.

Why Half-Filled d-Orbitals Matter

There is a second, subtler effect. In the metallic state, the d-band (the range of energy levels formed by overlapping d-orbitals) is half-filled for Group 6 elements. A half-filled band is the most stable configuration because it allows all bonding states to be occupied while leaving antibonding states empty.

If the d-band were less than half-filled (as in Groups 3–5), some bonding states would be empty, weakening the bond. If it were more than half-filled (as in Groups 7–10), extra electrons would have to occupy antibonding states, which also weakens the bond. Group 6 hits the sweet spot: maximum bonding strength with no wasted electrons.

Body-Centered Cubic Structure: A Bonus

Most transition metals crystallize in one of three structures: face-centered cubic (FCC), hexagonal close-packed (HCP), or body-centered cubic (BCC). Group 6 elements all adopt the BCC structure at room temperature.

BCC is not the most closely packed structure (it has a packing efficiency of 68% vs. 74% for FCC and HCP), but it has a unique advantage: each atom has eight nearest neighbors at a relatively close distance, and the d-orbital overlap between those neighbors is particularly strong. The less-dense packing also means the atoms are not forced so close that electron repulsion becomes significant. This combination—strong directional bonding plus low repulsion—gives BCC metals high melting points. Chromium, molybdenum, and tungsten all follow this pattern.

Comparison with Neighboring Groups

To appreciate how exceptional Group 6 is, compare melting points across the 5th period (the row starting with rubidium):

  • Yttrium (Group 3): 1,522°C
  • Zirconium (Group 4): 1,855°C
  • Niobium (Group 5): 2,477°C
  • Molybdenum (Group 6): 2,623°C
  • Technetium (Group 7): 2,157°C
  • Ruthenium (Group 8): 2,334°C

Molybdenum peaks at Group 6. In the 6th period, tungsten (3,422°C) is far higher than tantalum (Group 5, 3,017°C) and rhenium (Group 7, 3,186°C). The same trend holds in the 4th period: chromium (1,907°C) beats vanadium (1,910°C) and manganese (1,246°C). The pattern is consistent across all three periods, confirming that Group 6 is special.

Why Tungsten Is the Absolute Highest

Tungsten has the highest melting point of any metal, and the reasons build on the Group 6 advantage. Its 5d electrons are more diffuse than chromium’s 3d electrons, allowing greater orbital overlap with neighboring atoms. Also, relativistic effects (which become significant for heavy elements) contract the 6s orbital, which increases the s-electron density near the nucleus and strengthens the bond further.

Seaborgium, the synthetic element at the bottom of Group 6, is expected to have a similarly high melting point, but only a few atoms have ever been made, so its properties are predicted rather than measured.

Practical Uses That Rely on High Melting Points

These extreme melting points are not just a curiosity—they drive real-world applications:

  • Tungsten is used in light bulb filaments, rocket engine nozzles, and electrical contacts because it can withstand intense heat without deforming.
  • Molybdenum is added to steel to make it stronger at high temperatures, which is why it appears in jet engine parts and high-speed cutting tools.
  • Chromium is used in stainless steel and as a protective coating, though its melting point is lower than its heavier cousins.

Without Group 6’s exceptional melting points, many high-temperature industrial processes would be impossible.

Frequently Asked Questions

Why does tungsten have a higher melting point than chromium?

Tungsten’s 5d orbitals are more extended than chromium’s 3d orbitals, so they overlap more with neighboring atoms, creating stronger metallic bonds. Additionally, relativistic effects contract the 6s orbital in tungsten, increasing electron density between nuclei. Both effects raise the melting point.

Why is the melting point of Group 6 higher than Group 7?

Group 7 elements (like manganese and rhenium) have one more d-electron per atom. That extra electron must occupy an antibonding state in the d-band, which weakens the metallic bond. Group 6’s half-filled d-band has no antibonding electrons, so the bond is stronger.

Is there any metal with a higher melting point than tungsten?

No. Tungsten has the highest melting point of any metal. Some non-metals like carbon (3,550°C) and certain compounds like tantalum hafnium carbide (above 3,900°C) melt higher, but among pure metals, tungsten is the record holder.

Why does chromium have a lower melting point than molybdenum?

Chromium’s 3d orbitals are smaller and less diffuse than molybdenum’s 4d orbitals, so the overlap between neighboring atoms is weaker. Also, chromium has a higher electron-electron repulsion because its electrons are closer to the nucleus. Both factors lower its melting point relative to molybdenum.

Does seaborgium have a high melting point too?

Seaborgium is predicted to have a melting point similar to tungsten, around 3,000°C or higher. However, only a few atoms have been synthesized, and they decay quickly, so the value has never been measured directly. The prediction is based on relativistic calculations and periodic trends.

Related

How pages are sourced and corrected: Sources and editorial policy.