OneStopList

Gods and goddesses

Kreg Precision Band Saw Fence: How It Works

Updated November 18, 2026

The Kreg Precision Band Saw Fence is an aftermarket fence system designed to replace the stock fence on a band saw, providing more accurate, repeatable, and stable cuts by clamping at both the front and rear of the saw table. It uses a rack-and-pinion mechanism to move the fence parallel to the blade, eliminating the common problem of the fence angling or bowing under pressure.

Background: Why a Better Fence Matters

Most band saws ship with a basic metal or plastic fence that clamps only at the front of the table. This design has two inherent weaknesses: it can pivot slightly under side pressure, and it offers no support behind the blade. For resawing (cutting a board into thinner pieces) or cutting straight lines in thick stock, the stock fence often leads to drift—the blade’s natural tendency to wander—and inconsistent thickness. Kreg, a company known for pocket-hole jigs and woodworking tools, introduced its Precision Band Saw Fence to address these issues. It has become a popular upgrade for owners of benchtop and floor-standing band saws from brands like Jet, Delta, and Rikon.

How the Kreg Fence Works

The Kreg Precision Band Saw Fence (model KMSBFS) mounts to the band saw’s existing table using a universal bracket kit. The key components are:

  • Dual clamping: The fence clamps at both the front and rear of the table, which keeps it square to the blade and prevents it from moving during a cut.
  • Rack-and-pinion adjustment: A knob on the front of the fence turns a pinion gear that moves along a rack on the fence body. This allows fine, precise positioning without having to tap the fence with a mallet.
  • Zero-clearance face: The fence comes with a replaceable face that sits close to the blade, reducing tear-out and supporting the workpiece right at the cut line.
  • Resaw support: An optional auxiliary fence (sold separately) attaches to the main fence to provide a tall surface for resawing, keeping the workpiece vertical.

To use it, you mount the track to the table, slide the fence onto the track, and tighten the two locking levers. Then you use the micro-adjust knob to set the exact distance from the blade. The fence stays parallel because both clamps engage simultaneously.

Choosing the Right Model

Kreg offers two main versions: the standard Precision Band Saw Fence (KMSBFS) and the Precision Band Saw Fence with Resaw Fence (KMSBFSR). The standard version fits most 14-inch band saws, while the resaw kit adds a 6-inch tall auxiliary fence for cutting wider boards. Before buying, check your saw’s table dimensions and mounting hole pattern. The universal bracket works with most saws, but some very small or odd-shaped tables may require drilling new holes. If you own a larger 17-inch or 19-inch saw, the fence may be too short for the table depth; measure your table from front to back to ensure the fence will span it.

Common Problems and Solutions

Users occasionally report two issues:

  • Fence not parallel to the blade: This can happen if the table’s miter slot is not parallel to the blade. The Kreg fence references the table edge, not the blade. To fix it, you must adjust the saw’s tracking or the fence’s mounting position.
  • Fence slipping during heavy cuts: If the locking levers are not tightened enough, the fence can shift. The solution is to apply more pressure, but also ensure the table surface is clean and dry.

Some users also note that the fence’s face is not perfectly flat, but this is usually minor and can be corrected by sanding or replacing the face.

Comparison to Stock Fences and Other Upgrades

Compared to a stock fence, the Kreg fence is a significant upgrade in accuracy and ease of use. The dual clamping and rack-and-pinion adjustment are features typically found on much more expensive aftermarket fences, like those from Carter or Laguna. The Carter Band Saw Fence is another popular option, but it uses a different mounting system and is often more expensive. The Kreg fence is generally considered the best value for the money, especially for hobbyists. It does not, however, solve blade drift; you still need a properly tuned saw and a sharp blade with correct tension.

Cost and Value

The Kreg Precision Band Saw Fence typically retails for around $150–$200, depending on the version and retailer. The resaw kit adds roughly $50–$80. Considering that a new band saw with a good fence can cost $500 or more, the Kreg fence is a cost-effective way to improve the performance of an existing saw. It is a one-time purchase that can last for many years if cared for.

Safety and Best Practices

When using any band saw fence, always follow basic safety rules:

  • Keep your hands at least 3 inches from the blade; use push sticks for narrow cuts.
  • Ensure the fence is securely locked before starting the cut.
  • For resawing, use a push block or featherboard to keep the workpiece against the fence.
  • Never reach behind the blade while it is moving.
  • Disconnect power before changing blades or adjusting the fence.

The Kreg fence’s zero-clearance face reduces the risk of the workpiece catching, but it does not replace the need for a blade guard and splitter where applicable.

Alternatives to the Kreg Fence

If the Kreg fence does not fit your saw or budget, consider these alternatives:

  • Build your own: Many woodworkers make a simple wooden fence that clamps to the table with C-clamps. It works but lacks fine adjustment.
  • Carter Magnafence: A magnetic fence that sticks to the table, offering quick positioning but less precision.
  • Stock fence with shims: You can shim the stock fence to correct drift, but it is not repeatable.
  • Upgrade to a larger saw: If you need serious resaw capacity, a new saw with a built-in precision fence might be worth the investment.

Frequently Asked Questions

Will the Kreg fence fit my band saw? It fits most 14-inch band saws with a table that is at least 14 inches deep. Check the mounting bracket compatibility; Kreg provides a list of compatible models, and the universal bracket works with many others.

Does the fence eliminate blade drift? No. The fence helps you cut straight, but drift is caused by blade condition, tension, and tracking. You must set up the saw properly and use a sharp blade.

Can I use the fence for angled cuts? Yes, the fence can be tilted to match the table’s angle, but the micro-adjust knob may be harder to use when tilted. It is best for 90-degree cuts.

Is the resaw fence worth the extra cost? If you plan to resaw boards wider than 4 inches, yes. The tall auxiliary fence keeps the workpiece vertical and prevents it from twisting.

How do I install the fence? The kit includes a mounting bracket and hardware. You remove the stock fence, attach the bracket to the table (using existing holes or drilling new ones), then slide the fence onto the bracket and tighten.

Related

How pages are sourced and corrected: Sources and editorial policy.