OneStopList

Gods and goddesses

Skew Chisel Primer: Angles, Uses, and Technique

Updated November 18, 2026

A skew chisel is a woodturning tool with a flat, angled cutting edge used primarily for planing, smoothing, and creating decorative cuts on a lathe. It is often considered the most challenging turning tool to master, but it rewards skilled use with a glass-smooth finish that requires no sanding.

What Is a Skew Chisel?

A skew chisel is a bevel-edged blade, typically made of high-speed steel (HSS), ground to an angled tip. The cutting edge is not perpendicular to the handle; it is skewed, meaning it is set at an angle, usually 60 to 70 degrees relative to the long axis of the tool. The blade is ground with a bevel on both sides, and the cutting edge is formed where the two bevels meet. The tool is used with the bevel rubbing against the workpiece, which controls the cut and prevents catches.

How the Skew Chisel Works

The skew chisel cuts with a shearing action, similar to a plane iron. When presented correctly, the cutting edge slices through the wood fibers rather than scraping them. The key is to keep the bevel in contact with the rotating wood and to rotate the tool so that the cutting edge is presented at the correct angle. The tool is typically used with the handle lowered or raised to control the cut. For a planing cut, the skew is held with the long point down and the handle raised, so the cutting edge is presented at a shallow angle to the wood surface. For a peeling cut (often used for beads and V-grooves), the tool is rolled onto its side so the cutting edge is nearly perpendicular to the wood.

Choosing a Skew Chisel

Skew chisels come in various sizes, typically measured by blade width. Common widths are 1/2 inch, 3/4 inch, and 1 inch. Beginners often start with a 3/4-inch skew, as it is versatile and easier to control than a wider tool. The blade profile also matters: some skews have a straight cutting edge, while others have a slight curve (sometimes called a “curved skew” or “continental skew”). The curved edge is more forgiving and less prone to catches, making it a good choice for novices. When selecting a skew, look for a blade made of HSS (high-speed steel) or powdered metal, as these hold an edge longer than carbon steel. The handle should be comfortable and securely attached, and the tool should feel balanced in your hands.

Basic Techniques and Exercises

Before attempting complex cuts, practice the fundamental techniques on a scrap piece of wood. Start with a cylinder mounted on the lathe and practice the planing cut, which is the most common use. Hold the skew with the long point up (or down, depending on your preference) and the handle raised so the bevel rubs. Slowly pivot the tool to bring the cutting edge into contact. The cut should produce fine, continuous shavings. If you get a catch (the tool digs in), you are likely presenting the edge too steeply or not keeping the bevel in contact. Another essential exercise is cutting a V-groove: mark a line, then use the toe (the point) of the skew to cut a shallow V, rolling the tool from side to side. Practice on both spindle and faceplate work to understand how the tool behaves on different grain orientations.

Common Problems and How to Fix Them

  • Catch (dig-in): The most common issue. It happens when the cutting edge is presented too aggressively or the bevel loses contact. To fix it, slow down the lathe, raise the handle slightly, and ensure the bevel is rubbing before cutting.
  • Chatter or vibration: This occurs when the tool is not supported firmly or the bevel is not in full contact. Move the tool rest closer to the work and keep the tool pressed firmly against the rest.
  • Burned or scorched wood: This is caused by a dull edge or too much friction. Sharpen the skew regularly and take lighter cuts.
  • Uneven cuts or ridges: This often results from inconsistent tool angle. Practice maintaining a steady pivot point and use a consistent body position.

Skew Chisel vs. Other Turning Tools

The skew chisel is often compared to the spindle gouge and the roughing gouge. A spindle gouge has a curved cutting edge and is used for coves, beads, and other detailed profiles. It is more forgiving than a skew because the curved edge reduces the chance of a catch. A roughing gouge is used for initial shaping of a spindle from square to round; it has a deep, U-shaped flute and is not meant for fine finishing. The skew chisel is unique in its ability to produce a perfectly smooth, cylindrical surface and to cut crisp V-grooves and beads. While a spindle gouge can also do these cuts, the skew leaves a superior finish and is faster on straight sections. However, the skew requires more skill and is less forgiving of errors.

Safety and Maintenance

Safety is paramount when using a skew chisel. Always wear a face shield or safety glasses, as wood chips and broken tools can fly. Keep the tool rest close to the workpiece (within 1/8 inch) to reduce leverage and the risk of a catch. Never wear loose clothing or gloves, and tie back long hair. Keep the skew sharp: a dull tool is more dangerous than a sharp one because it requires more force and is more likely to catch. Sharpen the skew on a grinding wheel or a sharpening system, maintaining the original bevel angle (typically 25 to 30 degrees). After sharpening, hone the edge on a fine stone or leather strop to remove the burr. Always turn the lathe off before adjusting the tool rest or walking away.

Frequently Asked Questions

What is the difference between a skew chisel and a spindle gouge?

A skew chisel has a flat, angled cutting edge and is used for planing and finishing straight cylinders, as well as cutting V-grooves and beads. A spindle gouge has a curved, U-shaped cutting edge and is used for coves, beads, and other curved profiles. The skew is more difficult to master but leaves a smoother finish on flat surfaces.

How do I avoid catches with a skew chisel?

To avoid catches, keep the bevel rubbing against the wood at all times, present the cutting edge at a shallow angle, and use a light touch. Ensure the tool rest is close to the work, and do not let the tool point dig in. Practice on scrap wood until the motion feels natural.

What angle should I sharpen a skew chisel to?

The typical bevel angle for a skew chisel is 25 to 30 degrees. Some turners prefer a slightly steeper angle (35 degrees) for harder woods, but 25 to 30 degrees is a good starting point. The skew angle (the angle of the cutting edge relative to the handle) is usually 60 to 70 degrees.

Can I use a skew chisel on bowls?

Yes, but it is more challenging. On bowl interiors, the skew is used as a shear-scraper, with the bevel supported on the tool rest and the cutting edge presented at a skewed angle. It is not the primary tool for bowl turning; most turners use bowl gouges for the main cuts and the skew only for finishing or decorative details.

What is the best skew chisel for a beginner?

A 3/4-inch skew with a curved (continental) edge is often recommended for beginners. The curved edge is more forgiving and less likely to catch than a straight edge. Choose a tool with a comfortable handle and a blade made of HSS or powdered metal for durability.

Why does my skew chisel leave burn marks on the wood?

Burn marks are caused by friction from a dull edge or by taking too slow a cut with too much pressure. Sharpen the tool, increase the lathe speed slightly, and take lighter, faster cuts. Also, ensure the bevel is not rubbing too hard; it should glide, not press.

Related

How pages are sourced and corrected: Sources and editorial policy.